[CFT] Xorg Upgrade 7.5.2

[Sam Fourman Jr.]

Hello all,

I am testing  the all.13.1.patch , as well as  xorg 7.5.2 on FreeBSD HEAD

I have a Asus n53sv laptop with a sandybridge i7 CPU (as well as a Nvidia
540m)

my main problem is I can't start x becasue I get these errors

[   301.537] (EE) No devices detected.
[   301.537]
Fatal server error:
[   301.537] no screens found
[   301.537]


if anyone could provide me suggestions. that would be great :)
This is a clean install with no ports installed before I built the xorg-dev
svn
I will provide as much detail as possible below:


cat /etc/make.conf
WITH_NEW_XORG=yes
WITH_KMS=yes
# added by use.perl 2012-02-08 10:03:27
PERL_VERSION=5.12.4


301.354] (**) ModulePath set to "/usr/local/lib/xorg/modules"
[   301.354] (**) Extension "Composite" is enabled
[   301.354] (II) Loader magic: 0x7c7c60
[   301.354] (II) Module ABI versions:
[   301.354] X.Org ANSI C Emulation: 0.4
[   301.354] X.Org Video Driver: 10.0
[   301.354] X.Org XInput driver : 12.2
[   301.354] X.Org Server Extension : 5.0
[   301.355] (!!) More than one possible primary device found
[   301.355] (--) PCI: (0:0:2:0) 8086:0116:1043:1642 rev 9, Mem @
0xdc400000/4194304, 0xb0000000/268435456, I/O @ 0x0000e000/64, BIOS @
0x????????/65536
[   301.355] (--) PCI: (0:1:0:0) 10de:0df4:1043:1642 rev 161, Mem @
0xdb000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @
0x0000d000/128, BIOS @ 0x????????/65536
[   301.355] (II) "extmod" will be loaded. This was enabled by default and
also specified in the config file.
[   301.355] (II) "dbe" will be loaded. This was enabled by default and
also specified in the config file.
[   301.355] (II) "glx" will be loaded. This was enabled by default and
also specified in the config file.
[   301.355] (II) "record" will be loaded by default.
[   301.355] (II) "dri" will be loaded by default.
[   301.355] (II) "dri2" will be loaded by default.
[   301.355] (II) LoadModule: "ddc"
[   301.355] (II) Module "ddc" already built-in
[   301.355] (II) LoadModule: "dbe"
[   301.388] (II) Loading /usr/local/lib/xorg/modules/extensions/libdbe.so
[   301.400] (II) Module dbe: vendor="X.Org Foundation"
[   301.400] compiled for 1.10.4, module version = 1.0.0
[   301.400] Module class: X.Org Server Extension
[   301.400] ABI class: X.Org Server Extension, version 5.0
[   301.400] (II) Loading extension DOUBLE-BUFFER
[   301.400] (II) LoadModule: "extmod"
[   301.401] (II) Loading
/usr/local/lib/xorg/modules/extensions/libextmod.so
[   301.408] (II) Module extmod: vendor="X.Org Foundation"
[   301.408] compiled for 1.10.4, module version = 1.0.0
[   301.408] Module class: X.Org Server Extension
[   301.408] ABI class: X.Org Server Extension, version 5.0
[   301.408] (II) Loading extension MIT-SCREEN-SAVER
[   301.408] (II) Loading extension XFree86-VidModeExtension
[   301.408] (II) Loading extension XFree86-DGA
[   301.408] (II) Loading extension DPMS
[   301.408] (II) Loading extension XVideo
[   301.408] (II) Loading extension XVideo-MotionCompensation
[   301.408] (II) Loading extension X-Resource
[   301.408] (II) LoadModule: "glx"
[   301.409] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so
[   301.418] (II) Module glx: vendor="X.Org Foundation"
[   301.418] compiled for 1.10.4, module version = 1.0.0
[   301.418] ABI class: X.Org Server Extension, version 5.0
[   301.419] (==) AIGLX disabled
[   301.419] (II) Loading extension GLX
[   301.420] (II) LoadModule: "record"
[   301.420] (II) Loading
/usr/local/lib/xorg/modules/extensions/librecord.so
[   301.421] (II) Module record: vendor="X.Org Foundation"
[   301.421] compiled for 1.10.4, module version = 1.13.0
[   301.421] Module class: X.Org Server Extension
[   301.421] ABI class: X.Org Server Extension, version 5.0
[   301.421] (II) Loading extension RECORD
[   301.421] (II) LoadModule: "dri"
[   301.422] (II) Loading /usr/local/lib/xorg/modules/extensions/libdri.so
[   301.437] (II) Module dri: vendor="X.Org Foundation"
[   301.437] compiled for 1.10.4, module version = 1.0.0
[   301.437] ABI class: X.Org Server Extension, version 5.0
[   301.437] (II) Loading extension XFree86-DRI
[   301.437] (II) LoadModule: "dri2"
[   301.438] (II) Loading /usr/local/lib/xorg/modules/extensions/libdri2.so
[   301.438] (II) Module dri2: vendor="X.Org Foundation"
[   301.438] compiled for 1.10.4, module version = 1.2.0
[   301.438] ABI class: X.Org Server Extension, version 5.0
[   301.438] (II) Loading extension DRI2
[   301.438] (II) LoadModule: "intel"
[   301.465] (II) Loading /usr/local/lib/xorg/modules/drivers/intel_drv.so
[   301.502] (II) Module intel: vendor="X.Org Foundation"
[   301.502] compiled for 1.10.4, module version = 2.17.0
[   301.502] Module class: X.Org Video Driver
[   301.502] ABI class: X.Org Video Driver, version 10.0
[   301.502] (II) LoadModule: "mouse"
[   301.503] (II) Loading /usr/local/lib/xorg/modules/input/mouse_drv.so
[   301.516] (II) Module mouse: vendor="X.Org Foundation"
[   301.516] compiled for 1.10.4, module version = 1.7.1
[   301.516] Module class: X.Org XInput Driver
[   301.516] ABI class: X.Org XInput driver, version 12.2
[   301.516] (II) LoadModule: "kbd"
[   301.517] (II) Loading /usr/local/lib/xorg/modules/input/kbd_drv.so
[   301.523] (II) Module kbd: vendor="X.Org Foundation"
[   301.523] compiled for 1.10.4, module version = 1.6.1
[   301.523] Module class: X.Org XInput Driver
[   301.523] ABI class: X.Org XInput driver, version 12.2
[   301.523] (II) intel: Driver for Intel Integrated Graphics Chipsets:
i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[   301.524] (--) Using syscons driver with X support (version 2.0)
[   301.524] (--) using VT number 9

[   301.537] (EE) No devices detected.
[   301.537]
Fatal server error:
[   301.537] no screens found
[   301.537]
Please consult the The X.Org Foundation support
 at http://wiki.x.org
 for help.
[   301.537] Please also check the log file at "/var/log/Xorg.0.log" for
additional information.
[   301.537]




sam# dmesg
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-CURRENT #3 r231181M: Wed Feb  8 00:31:01 UTC 2012
    sfourman@Titan:/usr/obj/usr/src/sys/GENERIC amd64
WARNING: WITNESS option enabled, expect reduced performance.
CPU: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz (1995.51-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x206a7  Family = 6  Model = 2a  Stepping =
7

Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>

Features2=0x1dbae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,XSAVE,OSXSAVE,AVX>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant, performance statistics
real memory  = 4294967296 (4096 MB)
avail memory = 3978256384 (3793 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <_ASUS_ Notebook>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
 cpu4 (AP): APIC ID:  4
 cpu5 (AP): APIC ID:  5
 cpu6 (AP): APIC ID:  6
 cpu7 (AP): APIC ID:  7
ACPI Warning: 32/64X FACS address mismatch in FADT -
0xAAFE4E40/0x00000000AAFE4D40, using 32 (20120111/tbfadt-531)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ctl: CAM Target Layer loaded
acpi0: <_ASUS_ Notebook> on motherboard
acpi_ec0: <Embedded Controller: GPE 0x1b, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xd000-0xd07f mem
0xdb000000-0xdbffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff irq 16 at
device 0.0 on pci1
vgapci1: <VGA-compatible display> port 0xe000-0xe03f mem
0xdc400000-0xdc7fffff,0xb0000000-0xbfffffff irq 16 at device 2.0 on pci0
agp0: <SandyBridge mobile GT2 IG> on vgapci1
agp0: aperture size is 256M, detected 65532k stolen memory
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdf008000-0xdf0083ff irq 16
at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0: <EHCI (generic) USB 2.0 controller> on ehci0
hdac0: <Intel Cougar Point HDA Controller> mem 0xdf000000-0xdf003fff irq 22
at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
ath0: <Atheros 9285> mem 0xddc00000-0xddc0ffff irq 17 at device 0.0 on pci3
[ath] AR9285E_20 detected; using XE TX gain tables
ath0: AR9285 mac 192.2 RF5133 phy 14.0
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0
pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci4: <ACPI PCI bus> on pcib4
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xdd200000-0xdd20ffff irq 19
at device 0.0 on pci4
xhci0: 32 byte context size.
usbus1 on xhci0
pcib5: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci5: <ACPI PCI bus> on pcib5
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port
0x9000-0x90ff mem 0xd2104000-0xd2104fff,0xd2100000-0xd2103fff irq 17 at
device 0.0 on pci5
re0: Using 1 MSI-X message
re0: turning off MSI enable bit.
re0: ASPM disabled
re0: Chip rev. 0x2c000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX,
100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master,
1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow,
1000baseT-FDX-flow-master, auto, auto-flow
re0: Ethernet address: 14:da:e9:20:d9:96
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xdf007000-0xdf0073ff irq 23
at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2: <EHCI (generic) USB 2.0 controller> on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Cougar Point AHCI SATA controller> port
0xe0b0-0xe0b7,0xe0a0-0xe0a3,0xe090-0xe097,0xe080-0xe083,0xe060-0xe07f mem
0xdf006000-0xdf0067ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
orm0: <ISA Option ROM> at iomem 0xc0000-0xce7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
p4tcc4: <CPU Frequency Thermal Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
p4tcc5: <CPU Frequency Thermal Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
p4tcc7: <CPU Frequency Thermal Control> on cpu7
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC269 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC269 HDA CODEC Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC269 HDA CODEC PCM (Analog 2.0+HP/2.0)> at nid 27,33 and
24,25 on hdaa0
pcm1: <Realtek ALC269 HDA CODEC PCM (Onboard Digital)> at nid 30 on hdaa0
hdacc1: <Intel Cougar Point HDA CODEC> at cad 3 on hdac0
hdaa1: <Intel Cougar Point HDA CODEC Audio Function Group> at nid 1 on
hdacc1
pcm2: <Intel Cougar Point HDA CODEC PCM (HDMI/DP 8ch)> at nid 6 on hdaa1
usbus0: 480Mbps High Speed USB v2.0
usbus1: 5.0Gbps Super Speed USB v3.0
usbus2: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <0x1b73> at usbus1
uhub1: <0x1b73 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub1: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
ugen0.2: <vendor 0x8087> at usbus0
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on
usbus0
ugen2.2: <vendor 0x8087> at usbus2
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on
usbus2
uhub3: 6 ports with 6 removable, self powered
uhub4: 6 ports with 6 removable, self powered
ugen0.3: <vendor 0x13d3> at usbus0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST9640320AS 0002SDM1> ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 610480MB (1250263728 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
SMP: AP CPU #1 Launched!
cd0 at ahcich2 bus 0 scbus1 target 0 lun 0
cd0: <MATSHITA DVD-RAM UJ8A0ASW 1.01> Removable CD-ROM SCSI-0 device
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present -
tray closed
SMP: AP CPU #4 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC-low" frequency 15589953 Hz quality 1000
WARNING: WITNESS option enabled, expect reduced performance.
ugen0.4: <USB2.0 UVC 2M WebCam> at usbus0
Trying to mount root from ufs:/dev/ada0p2 [rw]...
wlan0: Ethernet address: 74:2f:68:3d:05:69
ubt0: <vendor 0x13d3 product 0x3304, class 224/1, rev 1.10/0.01, addr 3> on
usbus0
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ng_hci_process_command_timeout: ubt0hci - unable to complete HCI command
OGF=0x3, OCF=0x3. Timeout
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED
ath0: ath_start: sc_inreset_cnt > 0; bailing




Sam Fourman Jr.
_______________________________________________
[hidden email] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-x11
To unsubscribe, send any mail to "[hidden email]"

[Udo Lindemann]

Hello,

new to this list..
running fujitsu lifebook e750 with core i3 and 6G.

~# uname -a
FreeBSD hugo 10.0-CURRENT FreeBSD 10.0-CURRENT #22 r231133M: Tue Feb  7
18:12:28 CET 2012     root@hugo:/usr/obj/usr/src/sys/HUGO  amd64

Problems are already posted by other people:
- hal has to be kicked off
- Xorg -configure fails ( detects 2 cards )
        ...
        Number of created screens does not match number of detected devices.
                Configuration failed

- Switching to text ttys does not work anymore - the same during shutdown,
screen stays blank.

Apart from this everything seems fine, no special graphic benchmarks but
running kdm4 I can start kde4, gnome2 and xfce4 and all standard applications.
Chrome feels pretty quick and Xorg CPU usage greatly reduced ( as expected )

Thanks very much to all people involved!

Udo Lindemann

PS There is a lot of dmesg output with some ii2c errors which I cannot
interpret, if somebody is interested....

_______________________________________________
[hidden email] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-x11
To unsubscribe, send any mail to "[hidden email]"

[Warren Block]

New kernel compiled (thanks Meowthink and mike xx).

How do I tell if I'm "qualified" for the new Intel driver?  The machine
has 945GME video.
_______________________________________________
[hidden email] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-x11
To unsubscribe, send any mail to "[hidden email]"

[Mikolaj Kowalski]

What is the best way to configure mouse in this release?


Is HAL support will be dropped in the future?

BTW: server runns fine on Integrated Graphics Chipset: Intel(R) Q45/Q43.

On Mon, Feb 06, 2012 at 01:45:36AM +0000, Martin Wilke wrote:

> Knock knock...
>
> The X11 Team is pleased to announce the next round of Xorg updates.
> Note that this is experimental so you really have to know what you are
> doing, read UPDATING in the repository, and follow our exact
> instructions. We are specifically looking for feedback from Intel, ATI
> and NVIDIA users.
>
> Summary of changes:
>
> xf86-video-nouveau has been removed along with the WITHOUT_NOUVEAU
> knob. We suggest switching to the nvidia blob.
>
> KMS Support [1]:
> Unfortunately, the intel KMS driver will only work for the latest
> FreeBSD 9-STABLE or 10-CURRENT users. The patch for HEAD current is
> named all.13.1.patch. The higher the version the newer the patch is.
> Other needed patches are already available in the Xorg update.
>
> HEAD Users:
> Get the latest patchset from Kib here:
> http://people.freebsd.org/~kib/drm/
>
> 9-STABLE Users:
> 'meowthink' is currently maintaining the backport to 9 STABLE.
> Make sure you have the latest FreeBSD 9-STABLE source.
> Get the patch from here:
> https://docs.google.com/leaf?id=0BxbPi2OX4_B-NWY3NWU3MzEtNDBjYy00NTljLThlZGItMWFlYjIyYjI4Yjk3&hl=en_US
>
> Rebuild your Kernel and reboot.
>
> Known issuse:
> There will be a patch reject in the sys/dev/drm/i915_suspend.c file.
> The solution is to manually undo the expansion of the $FreeBSD: ....$
> tag, so it only saysis $FreeBSD$.
>
> Checkout Xorg Development Repo:
> You will need to install devel/subversion in order to checkout the xorg
> repo. Next, you will need to add WITH_NEW_XORG=yes in
> your /etc/make.conf if you want to try out the new Xorg and mesa.
>
> Intel users: note that if you are not qualified for the KMS patch, you
> shouldn't use WITH_NEW_XORG=yes because the old intel driver doesn't
> build with the new X server. If you are qualified, you should also set
> WITH_KMS=yes in /etc/make.conf.
>
> svn co https://trillian.chruetertee.ch/svn/ports/tags/xorg_7_5_2
>
> A small merge script to merge the svn checkout into the real portstree
> can be found here:
>
> http://people.freebsd.org/~miwi/xorg/xorgmerge
>
> The script is a modified version of the old kdemerge script. Please set
> the KDEDIR variable to the path of your X.org ports.
>
> After merging, run one of the following command, depending on which
> tool you use to manage your installed packages.
>
>     portupgrade -af \*
>     portmaster -a
>
> After installing these, you will have to rebuild all xf86-* ports. We
> will bump all related ports during the commit to the ports tree.
>
> Roadmap:
>
> Our current plan is to let the CFT running until the last weekend of
> February. We hope to get a lot feedback to solve as many problems as
> possible. So please help us to get the best xorg update ever in!
>
>
> Links:
> http://wiki.freebsd.org/Intel_GPU [1]
> http://wiki.freebsd.org/Xorg
> http://miwi.bsdcrew.de/2012/02/working-on-xorg-stuff/
>
> Your FreeBSD Xorg Team
>
> PS: Please reply to the x11@ mailing list. Cross posted due to the
> potentially disruptive nature of the change and need to get a wide
> variety of testers.
>
> --
> +------------------oOO--(_)--OOo----------------+
> With best Regards,
>         Martin Wilke (miwi_(at)_FreeBSD.org)

_______________________________________________
[hidden email] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-x11
To unsubscribe, send any mail to "[hidden email]"

Martin Wilke wrote:

> Knock knock...
>
> The X11 Team is pleased to announce the next round of Xorg updates.
> Note that this is experimental so you really have to know what you are
> doing, read UPDATING in the repository, and follow our exact
> instructions. We are specifically looking for feedback from Intel, ATI
> and NVIDIA users.
>
> Summary of changes:
>
> xf86-video-nouveau has been removed along with the WITHOUT_NOUVEAU
> knob. We suggest switching to the nvidia blob.
>
> KMS Support [1]:
> Unfortunately, the intel KMS driver will only work for the latest
> FreeBSD 9-STABLE or 10-CURRENT users. The patch for HEAD current is
> named all.13.1.patch. The higher the version the newer the patch is.
> Other needed patches are already available in the Xorg update.
>
> HEAD Users:
> Get the latest patchset from Kib here:
> http://people.freebsd.org/~kib/drm/
>
> 9-STABLE Users:
> 'meowthink' is currently maintaining the backport to 9 STABLE.
> Make sure you have the latest FreeBSD 9-STABLE source.
> Get the patch from here:
> https://docs.google.com/leaf?id=0BxbPi2OX4_B-NWY3NWU3MzEtNDBjYy00NTljLThlZGItMWFlYjIyYjI4Yjk3&hl=en_US
>
> Rebuild your Kernel and reboot.
>
> Known issuse:
> There will be a patch reject in the sys/dev/drm/i915_suspend.c file.
> The solution is to manually undo the expansion of the $FreeBSD: ....$
> tag, so it only saysis $FreeBSD$.
>
> Checkout Xorg Development Repo:
> You will need to install devel/subversion in order to checkout the xorg
> repo. Next, you will need to add WITH_NEW_XORG=yes in
> your /etc/make.conf if you want to try out the new Xorg and mesa.
>
> Intel users: note that if you are not qualified for the KMS patch, you
> shouldn't use WITH_NEW_XORG=yes because the old intel driver doesn't
> build with the new X server. If you are qualified, you should also set
> WITH_KMS=yes in /etc/make.conf.
>
> svn co https://trillian.chruetertee.ch/svn/ports/tags/xorg_7_5_2
>
> A small merge script to merge the svn checkout into the real portstree
> can be found here:
>
> http://people.freebsd.org/~miwi/xorg/xorgmerge
>
> The script is a modified version of the old kdemerge script. Please set
> the KDEDIR variable to the path of your X.org ports.
>
> After merging, run one of the following command, depending on which
> tool you use to manage your installed packages.
>
>     portupgrade -af \*
>     portmaster -a
>
> After installing these, you will have to rebuild all xf86-* ports. We
> will bump all related ports during the commit to the ports tree.
>
> Roadmap:
>
> Our current plan is to let the CFT running until the last weekend of
> February. We hope to get a lot feedback to solve as many problems as
> possible. So please help us to get the best xorg update ever in!
>
>
> Links:
> http://wiki.freebsd.org/Intel_GPU [1]
> http://wiki.freebsd.org/Xorg
> http://miwi.bsdcrew.de/2012/02/working-on-xorg-stuff/

Did you write this at 04:00:00ish? Because the instructions need a
serious rewrite.

Anyways, this fails for me. Building a kernel with ``options drm''
fails (with some undefined reference errors). Using an ``options
drm''-free kernel, X fails to start due to ``(EE) RADEON(0): Kernel
modesetting setup failed'', but there's also a notable ``(II)
RADEON(0): Kernel too old missing accel information, assuming accel is
working'' (does that imply that ``options drm'' has to be fixed before
I should try anything else?).

I have a /etc/X11/xorg.conf file containing ``Driver "radeon"''. If I
remove the xorg.conf file, then I also get ``(EE) LoadModule: Module
fbdevhw does not have a fbdevhwModuleData data object.''. I can add a
stupid export entry to the fbdevhwstub.c file of the xorg-server port,
to make that particular error go away, but I still get ``(EE)
RADEON(0): Kernel modesetting setup failed''.

I'm using a Radeon 9600 card.
_______________________________________________
[hidden email] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-x11
To unsubscribe, send any mail to "[hidden email]"

[Niclas Zeising-4]

On 2012-02-11 01:48, [hidden email] wrote:

> Martin Wilke wrote:
>> Knock knock...
>>
>> The X11 Team is pleased to announce the next round of Xorg updates.
>> Note that this is experimental so you really have to know what you are
>> doing, read UPDATING in the repository, and follow our exact
>> instructions. We are specifically looking for feedback from Intel, ATI
>> and NVIDIA users.
>>
>> Summary of changes:
>>
>> xf86-video-nouveau has been removed along with the WITHOUT_NOUVEAU
>> knob. We suggest switching to the nvidia blob.
>>
>> KMS Support [1]:
>> Unfortunately, the intel KMS driver will only work for the latest
>> FreeBSD 9-STABLE or 10-CURRENT users. The patch for HEAD current is
>> named all.13.1.patch. The higher the version the newer the patch is.
>> Other needed patches are already available in the Xorg update.
>>
>> HEAD Users:
>> Get the latest patchset from Kib here:
>> http://people.freebsd.org/~kib/drm/
>>
>> 9-STABLE Users:
>> 'meowthink' is currently maintaining the backport to 9 STABLE.
>> Make sure you have the latest FreeBSD 9-STABLE source.
>> Get the patch from here:
>> https://docs.google.com/leaf?id=0BxbPi2OX4_B-NWY3NWU3MzEtNDBjYy00NTljLThlZGItMWFlYjIyYjI4Yjk3&hl=en_US
>>
>> Rebuild your Kernel and reboot.
>>
>> Known issuse:
>> There will be a patch reject in the sys/dev/drm/i915_suspend.c file.
>> The solution is to manually undo the expansion of the $FreeBSD: ....$
>> tag, so it only saysis $FreeBSD$.
>>
>> Checkout Xorg Development Repo:
>> You will need to install devel/subversion in order to checkout the xorg
>> repo. Next, you will need to add WITH_NEW_XORG=yes in
>> your /etc/make.conf if you want to try out the new Xorg and mesa.
>>
>> Intel users: note that if you are not qualified for the KMS patch, you
>> shouldn't use WITH_NEW_XORG=yes because the old intel driver doesn't
>> build with the new X server. If you are qualified, you should also set
>> WITH_KMS=yes in /etc/make.conf.
>>
>> svn co https://trillian.chruetertee.ch/svn/ports/tags/xorg_7_5_2
>>
>> A small merge script to merge the svn checkout into the real portstree
>> can be found here:
>>
>> http://people.freebsd.org/~miwi/xorg/xorgmerge
>>
>> The script is a modified version of the old kdemerge script. Please set
>> the KDEDIR variable to the path of your X.org ports.
>>
>> After merging, run one of the following command, depending on which
>> tool you use to manage your installed packages.
>>
>>     portupgrade -af \*
>>     portmaster -a
>>
>> After installing these, you will have to rebuild all xf86-* ports. We
>> will bump all related ports during the commit to the ports tree.
>>
>> Roadmap:
>>
>> Our current plan is to let the CFT running until the last weekend of
>> February. We hope to get a lot feedback to solve as many problems as
>> possible. So please help us to get the best xorg update ever in!
>>
>>
>> Links:
>> http://wiki.freebsd.org/Intel_GPU [1]
>> http://wiki.freebsd.org/Xorg
>> http://miwi.bsdcrew.de/2012/02/working-on-xorg-stuff/
>
> Did you write this at 04:00:00ish? Because the instructions need a
> serious rewrite.
>
> Anyways, this fails for me. Building a kernel with ``options drm''
> fails (with some undefined reference errors). Using an ``options
> drm''-free kernel, X fails to start due to ``(EE) RADEON(0): Kernel
> modesetting setup failed'', but there's also a notable ``(II)
> RADEON(0): Kernel too old missing accel information, assuming accel is
> working'' (does that imply that ``options drm'' has to be fixed before
> I should try anything else?).
>
> I have a /etc/X11/xorg.conf file containing ``Driver "radeon"''. If I
> remove the xorg.conf file, then I also get ``(EE) LoadModule: Module
> fbdevhw does not have a fbdevhwModuleData data object.''. I can add a
> stupid export entry to the fbdevhwstub.c file of the xorg-server port,
> to make that particular error go away, but I still get ``(EE)
> RADEON(0): Kernel modesetting setup failed''.
>
> I'm using a Radeon 9600 card.

To be able to help you at all, we need your xorg.log.0, your xorg.conf
and preferably your dmesg.  Did you use the WITH_NEW_XORG= knob, or did
you apply the kms patch, is also good to know.
--
Niclas
_______________________________________________
[hidden email] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-x11
To unsubscribe, send any mail to "[hidden email]"

[Adam K Kirchhoff-3]

I've run it for a while now and am actually having a pretty serious
issue:

http://thorn.visualtech.com/screenshot.jpg

As you can see, that big window on the right monitor (though certainly
doesn't limit itself to just that screen) is almost entirely corrupt.
It's an xfce4 Terminal, though this can happen with nearly any window,
and happens both with compositing enabled or disabled.  Getting the
window to redraw somehow (either by highlighting all the text or
resizing it) will fix tha areas that are redrawn.

The problem is most often triggered by moving the window around, or
moving other windows around on top of it.  Unfortunately, it makes X
barely usable.

Adam

On Mon, 06 Feb 2012 10:35:50 -0500
Adam K Kirchhoff <[hidden email]> wrote:

>
> A big thanks to all.
>
> [adamk@memory ~]$ cat /var/log/Xorg.0.log | head -n 10
> [    46.127]
> X.Org X Server 1.10.4
> Release Date: 2011-08-19
> [    46.128] X Protocol Version 11, Revision 0
> [    46.128] Build Operating System: FreeBSD 9.0-STABLE amd64
> [    46.128] Current Operating System: FreeBSD memory.visualtech.com
> 9.0-STABLE FreeBSD 9.0-STABLE #5: Thu Jan 26 22:09:39 EST 2012    
> [hidden email]:/usr/obj/usr/src/sys/MEMORY amd64
> [    46.128] Build Date: 06 February 2012  09:37:45AM
> [    46.128]
> [    46.128] Current version of pixman: 0.24.0
> [    46.128]    Before reporting problems, check http://wiki.x.org
>
> [adamk@memory ~]$ glxinfo | grep -i OpenGL
> IRQ's not enabled, falling back to busy waits: 2 0
> OpenGL vendor string: Advanced Micro Devices, Inc.
> OpenGL renderer string: Mesa DRI R600 (RV710 954F)  TCL
> OpenGL version string: 2.1 Mesa 7.11.2
> OpenGL shading language version string: 1.20
> OpenGL extensions:
>
> 3D compositing works with KDE's desktop effects.  compiz works as
> well (though enabling the magnifier plugin crashes X).  xmoto,
> foobillard, neverball and openarena are all (to varying degrees)
> playable.
>
> Adam
>
>
>
> _______________________________________________
> [hidden email] mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-x11
> To unsubscribe, send any mail to "[hidden email]"

_______________________________________________
[hidden email] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-x11
To unsubscribe, send any mail to "[hidden email]"

[Niclas Zeising-4]

[Add the mailing list as well]

I think there is issues with the KMS patch and radeon cards, the KMS
patch is primarily for intel cards, but I'm not 100% sure.  Can someone
else please verify?

On 2012-02-11 16:40, [hidden email] wrote:

> On Sat, Feb 11, 2012 at 8:45 AM, Niclas Zeising <[hidden email]> wrote:
>> On 2012-02-11 01:48, [hidden email] wrote:
>>> Anyways, this fails for me. Building a kernel with ``options drm''
>>> fails (with some undefined reference errors). Using an ``options
>>> drm''-free kernel, X fails to start due to ``(EE) RADEON(0): Kernel
>>> modesetting setup failed'', but there's also a notable ``(II)
>>> RADEON(0): Kernel too old missing accel information, assuming accel is
>>> working'' (does that imply that ``options drm'' has to be fixed before
>>> I should try anything else?).
>>>
>>> I have a /etc/X11/xorg.conf file containing ``Driver "radeon"''. If I
>>> remove the xorg.conf file, then I also get ``(EE) LoadModule: Module
>>> fbdevhw does not have a fbdevhwModuleData data object.''. I can add a
>>> stupid export entry to the fbdevhwstub.c file of the xorg-server port,
>>> to make that particular error go away, but I still get ``(EE)
>>> RADEON(0): Kernel modesetting setup failed''.
>>>
>>> I'm using a Radeon 9600 card.
>>
>> To be able to help you at all, we need your xorg.log.0, your xorg.conf
>> and preferably your dmesg.  Did you use the WITH_NEW_XORG= knob, or did
>> you apply the kms patch, is also good to know.
>
> I added ``WITH_NEW_XORG=1'' and ``WITH_KMS=1'' (despite the
> instructions saying ``WITH_NEW_XORG=yes''; any problems with that?) to
> make.conf.

That doesn't matter, as far as WITH_NEW_XORG is set to something (i.e.,
it is defined).

> I patched the kernel using
> http://people.freebsd.org/~kib/drm/all.13.1.patch. (The kernel did not
> build due to ``options drm'' (and ``options radeondrm'') in my kernel
> configuration file. So I removed those options, allowing the build to
> succeed.)
> Despite the instructions suggesting to first boot the new kernel
> before proceeding any further, I did not do that.
> I checked out https://trillian.chruetertee.ch/svn/ports/tags/xorg_7_5_2,
> and merged the contents within, using the (path-tweaked)
> http://people.freebsd.org/~miwi/xorg/xorgmerge script.
> I did not actually rebuild all of the ports that portupgrade proposed
> to rebuild, but I did rebuild what I believe are relevant to X.
> Then I booted the patched kernel and tried to run ``startx''.
>
> Further contents are:
> - make.conf
> - dmesg
> - xorg.conf
> - Xorg.log [for when using the said xorg.conf]
> - Xorg.log [for when using no xorg.conf, and not using the said
> fbdevhwstub.c patch]
> - Xorg.log [for when using no xorg.conf, and using the said fbdevhwstub.c patch]
> - my kernel configuration file
> - log for ``make buildkernel KERNCONF=HQ'' when HQ contains ``options drm'' ends
>
> ============== make.conf begins ==============
> CPUTYPE?=pentium4
> CFLAGS= -O2 -fno-strict-aliasing -pipe

This is the default and shouldn't be needed in make.conf

> WITH_NEW_XORG=1
> WITH_KMS=1
> OVERRIDE_LINUX_BASE_PORT=f10
> OVERRIDE_LINUX_NONBASE_PORTS=f10
> PERL_VERSION=5.14.2
> ============== make.conf ends ==============
>
> ============== dmesg begins ==============
> Copyright (c) 1992-2012 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 9.9-CURRENT #1 r230760M: Fri Feb 10 18:56:46 CET 2012
>     devhc@:/usr/obj/usr/src/sys/HQ i386
> CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz (2798.72-MHz 686-class CPU)
>   Origin = "GenuineIntel"  Id = 0xf29  Family = f  Model = 2  Stepping = 9
>   Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>   Features2=0x4400<CNXT-ID,xTPR>
> real memory  = 536870912 (512 MB)
> avail memory = 514109440 (490 MB)
> Event timer "LAPIC" quality 400
> ACPI APIC Table: <A M I  OEMAPIC >
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> FreeBSD/SMP: 1 package(s) x 1 core(s) x 2 HTT threads
>  cpu0 (BSP): APIC ID:  0
>  cpu1 (AP/HT): APIC ID:  1
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> acpi0: <A M I OEMXSDT> on motherboard
> acpi0: Power Button (fixed)
> acpi0: reservation of 0, a0000 (3) failed
> acpi0: reservation of 100000, 1fef0000 (3) failed
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
> cpu0: <ACPI CPU> on acpi0
> cpu1: <ACPI CPU> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> agp0: <Intel 82865 host to AGP bridge> on hostb0
> pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
> pcib1: failed to allocate initial prefetch window: 0xc0000000-0xfaffffff
> pci1: <ACPI PCI bus> on pcib1
> vgapci0: <VGA-compatible display> port 0xd000-0xd0ff mem
> 0xc0000000-0xcfffffff,0xfbee0000-0xfbeeffff irq 16 at device 0.0 on
> pci1
> vgapci1: <VGA-compatible display> mem
> 0xd0000000-0xdfffffff,0xfbef0000-0xfbefffff at device 0.1 on pci1
> uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xc880-0xc89f
> irq 16 at device 29.0 on pci0
> usbus0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
> uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xcc00-0xcc1f
> irq 19 at device 29.1 on pci0
> usbus1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
> ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem
> 0xfbdffc00-0xfbdfffff irq 23 at device 29.7 on pci0
> usbus2: EHCI version 1.0
> usbus2: <Intel 82801EB/R (ICH5) USB 2.0 controller> on ehci0
> pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> skc0: <3Com 3C940 Gigabit Ethernet> port 0xe800-0xe8ff mem
> 0xfbffc000-0xfbffffff irq 22 at device 5.0 on pci2
> skc0: 3Com Gigabit LOM (3C940) rev. (0x1)
> sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
> sk0: Ethernet address: 00:0e:a6:35:15:91
> miibus0: <MII bus> on sk0
> e1000phy0: <Marvell 88E1011 Gigabit PHY> PHY 0 on miibus0
> e1000phy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
> 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
> pcm0: <Creative CT5880-E> port 0xec00-0xec3f irq 20 at device 12.0 on pci2
> pcm0: <eMicro EM28028 AC97 Codec>
> pcm0: <Playback: DAC1,DAC2 / Record: ADC>
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH5 UDMA100 controller> port
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on
> pci0
> ata0: <ATA channel> at channel 0 on atapci0
> ata1: <ATA channel> at channel 1 on atapci0
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> acpi_button0: <Power Button> on acpi0
> attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
> Timecounter "i8254" frequency 1193182 Hz quality 0
> Event timer "i8254" frequency 1193182 Hz quality 100
> atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
> Event timer "RTC" frequency 32768 Hz quality 0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> pmtimer0 on isa0
> orm0: <ISA Option ROM> at iomem 0xc0000-0xccfff pnpid ORM0000 on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> p4tcc0: <CPU Frequency Thermal Control> on cpu0
> p4tcc1: <CPU Frequency Thermal Control> on cpu1
> Timecounters tick every 1.000 msec
> usbus0: 12Mbps Full Speed USB v1.0
> usbus1: 12Mbps Full Speed USB v1.0
> usbus2: 480Mbps High Speed USB v2.0
> ugen0.1: <Intel> at usbus0
> uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
> ugen1.1: <Intel> at usbus1
> uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
> ugen2.1: <Intel> at usbus2
> uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
> ata1: DMA limited to UDMA33, controller found non-ATA66 cable
> ada0 at ata0 bus 0 scbus0 target 0 lun 0
> ada0: <Maxtor 6Y080P0 YAR41BW0> ATA-7 device
> ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
> ada0: 78167MB (160086528 512 byte sectors: 16H 63S/T 16383C)
> ada0: Previously was known as ad0
> cd0 at ata1 bus 0 scbus1 target 0 lun 0
> cd0: <SONY DVD RW DW-D26A JYS2> Removable CD-ROM SCSI-0 device
> cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
> cd0: Attempt to query device size failed: NOT READY, Medium not present
> SMP: AP CPU #1 Launched!
> GEOM: ada0s1: geometry does not match label (255h,63s != 16h,63s).
> uhub0: 2 ports with 2 removable, self powered
> uhub1: 2 ports with 2 removable, self powered
> Root mount waiting for: usbus2
> uhub2: 4 ports with 4 removable, self powered
> Root mount waiting for: usbus2
> ugen2.2: <JetFlash> at usbus2
> umass0: <JetFlash Mass Storage Device, class 0/0, rev 2.00/1.41, addr
> 2> on usbus2
> Trying to mount root from ufs:/dev/ada0s1a [rw,noatime]...
> da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
> da0: <JetFlash TS2GJFV30 8.07> Removable Direct Access SCSI-2 device
> da0: 40.000MB/s transfers
> da0: 1955MB (4005886 512 byte sectors: 255H 63S/T 249C)
> ugen0.2: <vendor 0x04fc> at usbus0
> ums0: <vendor 0x04fc USB Multi-Smart Mouse, class 0/0, rev 2.00/16.11,
> addr 2> on usbus0
> ums0: 5 buttons and [XYZT] coordinates ID=1
> vfs_domount_first: Mounting non-MPSAFE fs (ntfs) is deprecated
> sk0: link state changed to UP
> drm0: <ATI Radeon AP 9600> on vgapci0
> info: [drm] AGP at 0xe0000000 256MB
> info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
> info: [drm] No driver support for vblank timestamp query.
> info: [drm] Initialized radeon 1.31.0 20080613
> ============== dmesg ends ==============
>
> ============== xorg.conf begins ==============
> Section "ServerFlags"
> Option "DontZoom" "on"
> Option "VTSysReq" "on" #
> #Option "BlankTime" "1" #
> #Option "StandbyTime" "2" #
> #Option "SuspendTime" "3" #
> #Option "OffTime" "4" #
> Option "HandleSpecialKeys" "Always"
> Option "AIGLX" "off"
> Option "GlxVisuals" "minimal"
> Option "AllowEmptyInput" "off"
> Option "AutoAddDevices" "off"
> Option "AutoEnableDevices" "off"
> EndSection
>
> Section "InputDevice"
> Identifier "mouse1"
> Driver "mouse"
> Option "Device" "/dev/ums0"
> #Option "ZAxisMapping" "3 4 5 6 7 8 9 10 11 12 13 14" :<
> EndSection
>
> Section "InputDevice"
> Identifier "keyboard1"
> Driver "kbd"
> Option "XkbLayout" "us,hu"
> Option "AutoRepeat" "320 29"
> EndSection
>
> Section "Device"
> Identifier "card1"
> Driver "radeon"
> VideoRam 131072
>
> #Option "ScalerWidth" "1920"
> Option "AGPMode" "8"
> #Option "AGPFastWrite" "on" # sux
> Option "BusType" "AGP"
> Option "DisplayPriority" "HIGH"
> Option "EnablePageFlip" "on"
> Option "AccelMethod" "EXA"
> Option "AccelDFS" "on"
> #Option "FBTexPercent" "0"
> #Option "SubPixelOrder" "NONE"
> Option "LVDSProbePLL" "off"
> #Option "DefaultTMDSPLL" "on"
> #Option "DefaultTVDACAdj" "on"
> Option "Int10" "off"
> Option "R4xxATOM" "on"
> EndSection
>
> Section "Monitor"
> Identifier "monitor1"
> HorizSync 40-80
> VertRefresh 56-75
> #DisplaySize W H # mm
> EndSection
>
> Section "Screen"
> Identifier "screen1"
> Device "card1"
> Monitor "monitor1"
> DefaultDepth 24
> DefaultFbBpp 32
> Option "Int10" "off"
> Option "MTRR" "on"
> SubSection "Display"
> Depth 24
> FbBpp 32
> Modes "1280x1024" "1024x768" "800x600" "640x480"
> EndSubSection
> EndSection
>
> Section "ServerLayout"
> Identifier "layout1"
> Screen "screen1"
> InputDevice "mouse1" "CorePointer"
> InputDevice "keyboard1" "CoreKeyboard"
> EndSection
> ============== xorg.conf ends ==============
>
> ============== Xorg.log [for when using the said xorg.conf] begins
> ==============
> [    98.280] _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
> [    98.280] _XSERVTransOpen: transport open failed for inet6/:0
> [    98.280] _XSERVTransMakeAllCOTSServerListeners: failed to open
> listener for inet6
> [    98.325]
> X.Org X Server 1.10.4
> Release Date: 2011-08-19
> [    98.326] X Protocol Version 11, Revision 0
> [    98.326] Build Operating System: FreeBSD 9.9-CURRENT i386
> [    98.326] Current Operating System: FreeBSD  9.9-CURRENT FreeBSD
> 9.9-CURRENT #1 r230760M: Fri Feb 10 18:56:46 CET 2012
> devhc@:/usr/obj/usr/src/sys/HQ i386
> [    98.326] Build Date: 10 February 2012  10:55:21PM
> [    98.326]
> [    98.326] Current version of pixman: 0.24.0
> [    98.326] Before reporting problems, check http://wiki.x.org
> to make sure that you have the latest version.
> [    98.326] Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> [    98.326] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Feb 11
> 00:06:58 2012
> [    98.393] (==) Using config file: "/etc/X11/xorg.conf"
> [    98.406] (==) ServerLayout "layout1"
> [    98.406] (**) |-->Screen "screen1" (0)
> [    98.406] (**) |   |-->Monitor "monitor1"
> [    98.407] (**) |   |-->Device "card1"
> [    98.407] (**) |-->Input Device "mouse1"
> [    98.407] (**) |-->Input Device "keyboard1"
> [    98.407] (**) Option "DontZoom" "on"
> [    98.407] (**) Option "VTSysReq" "on"
> [    98.407] (**) Option "AIGLX" "off"
> [    98.407] (**) Option "AutoAddDevices" "off"
> [    98.407] (**) Option "AutoEnableDevices" "off"
> [    98.407] (**) Option "GlxVisuals" "minimal"
> [    98.407] (**) Not automatically adding devices
> [    98.407] (**) Not automatically enabling devices
> [    98.407] (**) VTSysReq enabled
> [    98.538] (==) FontPath set to:
> /usr/local/lib/X11/fonts/misc/,
> /usr/local/lib/X11/fonts/TTF/,
> /usr/local/lib/X11/fonts/OTF/,
> /usr/local/lib/X11/fonts/Type1/,
> /usr/local/lib/X11/fonts/100dpi/,
> /usr/local/lib/X11/fonts/75dpi/
> [    98.538] (==) ModulePath set to "/usr/local/lib/xorg/modules"
> [    98.538] (II) Loader magic: 0x81e1080
> [    98.538] (II) Module ABI versions:
> [    98.538] X.Org ANSI C Emulation: 0.4
> [    98.538] X.Org Video Driver: 10.0
> [    98.538] X.Org XInput driver : 12.2
> [    98.538] X.Org Server Extension : 5.0
> [    98.539] (--) PCI:*(0:1:0:0) 1002:4150:17ee:2002 rev 0, Mem @
> 0xc0000000/268435456, 0xfbee0000/65536, I/O @ 0x0000d000/256, BIOS @
> 0x????????/65536
> [    98.539] (--) PCI: (0:1:0:1) 1002:4170:17ee:2003 rev 0, Mem @
> 0xd0000000/268435456, 0xfbef0000/65536
> [    98.539] (II) LoadModule: "extmod"
> [    98.581] (II) Loading /usr/local/lib/xorg/modules/extensions/libextmod.so
> [    98.590] (II) Module extmod: vendor="X.Org Foundation"
> [    98.590] compiled for 1.10.4, module version = 1.0.0
> [    98.590] Module class: X.Org Server Extension
> [    98.590] ABI class: X.Org Server Extension, version 5.0
> [    98.590] (II) Loading extension MIT-SCREEN-SAVER
> [    98.590] (II) Loading extension XFree86-VidModeExtension
> [    98.590] (II) Loading extension XFree86-DGA
> [    98.590] (II) Loading extension DPMS
> [    98.590] (II) Loading extension XVideo
> [    98.590] (II) Loading extension XVideo-MotionCompensation
> [    98.590] (II) Loading extension X-Resource
> [    98.590] (II) LoadModule: "dbe"
> [    98.590] (II) Loading /usr/local/lib/xorg/modules/extensions/libdbe.so
> [    98.591] (II) Module dbe: vendor="X.Org Foundation"
> [    98.591] compiled for 1.10.4, module version = 1.0.0
> [    98.591] Module class: X.Org Server Extension
> [    98.591] ABI class: X.Org Server Extension, version 5.0
> [    98.591] (II) Loading extension DOUBLE-BUFFER
> [    98.591] (II) LoadModule: "glx"
> [    98.591] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so
> [    98.599] (II) Module glx: vendor="X.Org Foundation"
> [    98.599] compiled for 1.10.4, module version = 1.0.0
> [    98.599] ABI class: X.Org Server Extension, version 5.0
> [    98.600] (**) AIGLX disabled
> [    98.600] (II) Loading extension GLX
> [    98.601] (II) LoadModule: "record"
> [    98.601] (II) Loading /usr/local/lib/xorg/modules/extensions/librecord.so
> [    98.634] (II) Module record: vendor="X.Org Foundation"
> [    98.634] compiled for 1.10.4, module version = 1.13.0
> [    98.634] Module class: X.Org Server Extension
> [    98.634] ABI class: X.Org Server Extension, version 5.0
> [    98.634] (II) Loading extension RECORD
> [    98.634] (II) LoadModule: "dri"
> [    98.634] (II) Loading /usr/local/lib/xorg/modules/extensions/libdri.so
> [    98.689] (II) Module dri: vendor="X.Org Foundation"
> [    98.689] compiled for 1.10.4, module version = 1.0.0
> [    98.689] ABI class: X.Org Server Extension, version 5.0
> [    98.689] (II) Loading extension XFree86-DRI
> [    98.689] (II) LoadModule: "dri2"
> [    98.689] (II) Loading /usr/local/lib/xorg/modules/extensions/libdri2.so
> [    98.702] (II) Module dri2: vendor="X.Org Foundation"
> [    98.702] compiled for 1.10.4, module version = 1.2.0
> [    98.702] ABI class: X.Org Server Extension, version 5.0
> [    98.703] (II) Loading extension DRI2
> [    98.703] (II) LoadModule: "radeon"
> [    98.775] (II) Loading /usr/local/lib/xorg/modules/drivers/radeon_drv.so
> [    98.807] (II) Module radeon: vendor="X.Org Foundation"
> [    98.807] compiled for 1.10.4, module version = 6.14.3
> [    98.808] Module class: X.Org Video Driver
> [    98.808] ABI class: X.Org Video Driver, version 10.0
> [    98.816] (II) LoadModule: "mouse"
> [    98.831] (II) Loading /usr/local/lib/xorg/modules/input/mouse_drv.so
> [    98.835] (II) Module mouse: vendor="X.Org Foundation"
> [    98.835] compiled for 1.10.4, module version = 1.7.1
> [    98.835] Module class: X.Org XInput Driver
> [    98.835] ABI class: X.Org XInput driver, version 12.2
> [    98.835] (II) LoadModule: "kbd"
> [    98.836] (II) Loading /usr/local/lib/xorg/modules/input/kbd_drv.so
> [    98.837] (II) Module kbd: vendor="X.Org Foundation"
> [    98.837] compiled for 1.10.4, module version = 1.6.1
> [    98.837] Module class: X.Org XInput Driver
> [    98.837] ABI class: X.Org XInput driver, version 12.2
> [    98.837] (II) RADEON: Driver for ATI Radeon chipsets:
> ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
> ATI Radeon Mobility X300 (M24) 3152 (PCIE),
> ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
> ATI Radeon X600 (RV380) 3E50 (PCIE),
> ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
> ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
> ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
> ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
> ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
> ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
> ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
> ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
> ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
> ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
> ATI Radeon IGP330M/340M/350M (U2) 4337,
> ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
> ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
> ATI Radeon X800PRO (R420) JI (AGP),
> ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
> ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
> ATI Radeon Mobility 9800 (M18) JN (AGP),
> ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
> ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
> ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
> ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
> ATI Radeon Mobility M7 LW (AGP),
> ATI Mobility FireGL 7800 M7 LX (AGP),
> ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
> ATI FireGL Mobility 9000 (M9) Ld (AGP),
> ATI Radeon Mobility 9000 (M9) Lf (AGP),
> ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
> ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
> ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
> ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
> ATI Radeon 9800XT NJ (AGP),
> ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
> ATI Radeon Mobility 9600 (M10) NQ (AGP),
> ATI Radeon Mobility 9600 (M11) NR (AGP),
> ATI Radeon Mobility 9600 (M10) NS (AGP),
> ATI FireGL Mobility T2 (M10) NT (AGP),
> ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
> ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
> ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
> ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
> ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
> ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
> ATI Radeon Mobility X300 (M22) 5460 (PCIE),
> ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
> ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
> ATI Radeon X800PRO (R423) UI (PCIE),
> ATI Radeon X800LE (R423) UJ (PCIE),
> ATI Radeon X800SE (R423) UK (PCIE),
> ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
> ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
> ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
> ATI FireGL unknown (R423) UR (PCIE),
> ATI FireGL unknown (R423) UT (PCIE),
> ATI Mobility FireGL V5000 (M26) (PCIE),
> ATI Mobility FireGL V5000 (M26) (PCIE),
> ATI Mobility Radeon X700 XL (M26) (PCIE),
> ATI Mobility Radeon X700 (M26) (PCIE),
> ATI Mobility Radeon X700 (M26) (PCIE),
> ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
> ATI Radeon Mobility 9100 IGP (U3) 5835,
> ATI Radeon XPRESS 200 5954 (PCIE),
> ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
> ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
> ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
> ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
> ATI Radeon XPRESS 200M 5975 (PCIE),
> ATI Radeon XPRESS 200 5A41 (PCIE),
> ATI Radeon XPRESS 200M 5A42 (PCIE),
> ATI Radeon XPRESS 200 5A61 (PCIE),
> ATI Radeon XPRESS 200M 5A62 (PCIE),
> ATI Radeon X300 (RV370) 5B60 (PCIE),
> ATI Radeon X600 (RV370) 5B62 (PCIE),
> ATI Radeon X550 (RV370) 5B63 (PCIE),
> ATI FireGL V3100 (RV370) 5B64 (PCIE),
> ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
> ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
> ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
> ATI Mobility Radeon X800 XT (M28) (PCIE),
> ATI Mobility FireGL V5100 (M28) (PCIE),
> ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
> ATI Radeon X850 XT PE (R480) (PCIE),
> ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
> ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
> ATI Radeon X850 XT (R480) (PCIE),
> ATI Radeon X800XT (R423) 5D57 (PCIE),
> ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
> ATI Radeon X700 PRO (RV410) (PCIE),
> ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
> ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
> ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
> ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
> ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
> ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
> ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
> ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
> ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
> ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
> ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
> ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
> ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
> ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
> ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
> ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
> ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
> ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
> ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
> ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
> ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
> ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
> ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
> ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
> ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
> ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
> ATI Mobility Radeon X1700, ATI Radeon X2300HD,
> ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
> ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
> ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
> ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
> ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
> ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
> ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
> ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
> ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
> ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
> ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
> ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
> ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
> ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
> ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
> ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
> ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
> ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
> ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
> ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
> AMD FireStream 9250, ATI FirePro V8700 (FireGL),
> ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
> ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
> ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
> ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
> ATI Mobility Radeon HD 4670, ATI FirePro M5750,
> ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
> ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
> ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
> ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
> ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
> ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
> ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
> ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
> ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
> ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
> ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
> ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
> ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
> ATI Mobility Radeon HD 3850 X2, ATI RV670,
> ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
> ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
> ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
> ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
> ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
> ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
> ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
> ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
> ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
> ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
> ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
> ATI FireGL V3600, ATI Radeon HD 2600 LE,
> ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
> ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
> ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
> ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
> ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
> ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
> ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
> ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
> ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
> ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
> ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
> ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
> ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
> SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200, ATI Radeon 4100,
> ATI Mobility Radeon HD 4200, ATI Mobility Radeon 4100,
> ATI Radeon HD 4290, ATI Radeon HD 4250, AMD Radeon HD 6310 Graphics,
> AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
> AMD Radeon HD 6250 Graphics, AMD Radeon HD 6300 Series Graphics,
> AMD Radeon HD 6200 Series Graphics, CYPRESS,
> ATI FirePro (FireGL) Graphics Adapter,
> ATI FirePro (FireGL) Graphics Adapter,
> ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
> AMD Firestream 9350, ATI Radeon HD 5800 Series,
> ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
> ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
> ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
> ATI Mobility Radeon HD 5800 Series,
> ATI FirePro (FireGL) Graphics Adapter,
> ATI FirePro (FireGL) Graphics Adapter,
> ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
> ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
> ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
> ATI Mobility Radeon HD 5000 Series,
> ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
> ATI FirePro (FireGL) Graphics Adapter,
> ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
> ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
> ATI Mobility Radeon HD 5000 Series,
> ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
> ATI Mobility Radeon Graphics, CEDAR,
> ATI FirePro (FireGL) Graphics Adapter,
> ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
> ATI Radeon HD 5450, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
> CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, AMD Radeon HD 6900 Series,
> AMD Radeon HD 6900 Series, CAYMAN, CAYMAN, CAYMAN,
> AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,
> BARTS, Mobility Radeon HD 6000 Series,
> Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
> AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
> AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
> TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, CAICOS,
> CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
> CAICOS, CAICOS, CAICOS
> [    98.842] (--) Using syscons driver with X support (version 2.0)
> [    98.842] (--) using VT number 9
>
> [    98.849] (II) Loading /usr/local/lib/xorg/modules/drivers/radeon_drv.so
> [    98.849] (II) [KMS] Kernel modesetting enabled.
> [    98.849] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
> [    98.850] (**) RADEON(0): Depth 24, (**) framebuffer bpp 32
> [    98.850] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes
> (32 bpp pixmaps)
> [    98.850] (==) RADEON(0): Default visual is TrueColor
> [    98.850] (**) RADEON(0): Option "EnablePageFlip" "on"
> [    98.850] (**) RADEON(0): Option "AccelDFS" "on"
> [    98.850] (**) RADEON(0): Option "AccelMethod" "EXA"
> [    98.850] (==) RADEON(0): RGB weight 888
> [    98.851] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
> [    98.851] (--) RADEON(0): Chipset: "ATI Radeon 9600 AP (AGP)"
> (ChipID = 0x4150)
> [    98.851] (II) RADEON(0): AGP card detected
> [    98.851] drmOpenDevice: node name is /dev/dri/card0
> [    98.851] Failed to change owner or group for file /dev/dri! 2: No
> such file or directory
> [    98.851] Failed to change owner or group for file /dev/dri/card0!
> 2: No such file or directory
> [    98.851] drmOpenDevice: open result is -1, (No such file or directory)
> [    98.851] Failed to change owner or group for file /dev/dri/card0!
> 2: No such file or directory
> [    98.851] drmOpenDevice: open result is -1, (No such file or directory)
> [    98.851] drmOpenDevice: Open failed
> [    99.118] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
> [    99.118] drmOpenDevice: node name is /dev/dri/card0
> [    99.119] drmOpenDevice: open result is 9, (OK)
> [    99.119] drmOpenByBusid: drmOpenMinor returns 9
> [    99.119] drmOpenByBusid: Interface 1.4 failed, trying 1.1
> [    99.119] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
> [    99.119] (II) RADEON(0): Kernel too old missing accel information,
> assuming accel is working
> [    99.119] (II) Loading sub module "exa"
> [    99.119] (II) LoadModule: "exa"
> [    99.120] (II) Loading /usr/local/lib/xorg/modules/libexa.so
> [    99.131] (II) Module exa: vendor="X.Org Foundation"
> [    99.131] compiled for 1.10.4, module version = 2.5.0
> [    99.131] ABI class: X.Org Video Driver, version 10.0
> [    99.131] (II) RADEON(0): KMS Color Tiling: enabled
> [    99.131] (II) RADEON(0): KMS Pageflipping: enabled
> [    99.131] (II) RADEON(0): SwapBuffers wait for vsync: enabled
> [    99.131] (EE) RADEON(0): Kernel modesetting setup failed
> [    99.132] (II) UnloadModule: "radeon"
> [    99.132] (II) Unloading radeon
> [    99.132] (II) UnloadModule: "exa"
> [    99.132] (II) Unloading exa
> [    99.132] (EE) Screen(s) found, but none have a usable configuration.
> [    99.132]
> Fatal server error:
> [    99.132] no screens found
> [    99.132]
> Please consult the The X.Org Foundation support
> at http://wiki.x.org
>  for help.
> [    99.132] Please also check the log file at "/var/log/Xorg.0.log"
> for additional information.
> [    99.132]
> ============== Xorg.log [for when using the said xorg.conf] ends ==============
>
> ============== Xorg.log [for when using no xorg.conf, and not using
> the said fbdevhwstub.c patch] begins ==============
> [   283.957] _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
> [   283.958] _XSERVTransOpen: transport open failed for inet6/:0
> [   283.958] _XSERVTransMakeAllCOTSServerListeners: failed to open
> listener for inet6
> [   283.960]
> X.Org X Server 1.10.4
> Release Date: 2011-08-19
> [   283.960] X Protocol Version 11, Revision 0
> [   283.960] Build Operating System: FreeBSD 9.9-CURRENT i386
> [   283.960] Current Operating System: FreeBSD  9.9-CURRENT FreeBSD
> 9.9-CURRENT #1 r230760M: Fri Feb 10 18:56:46 CET 2012
> devhc@:/usr/obj/usr/src/sys/HQ i386
> [   283.960] Build Date: 10 February 2012  10:55:21PM
> [   283.960]
> [   283.960] Current version of pixman: 0.24.0
> [   283.960] Before reporting problems, check http://wiki.x.org
> to make sure that you have the latest version.
> [   283.960] Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> [   283.960] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Feb 11
> 00:10:04 2012
> [   283.961] (II) Loader magic: 0x81e1080
> [   283.961] (II) Module ABI versions:
> [   283.961] X.Org ANSI C Emulation: 0.4
> [   283.961] X.Org Video Driver: 10.0
> [   283.961] X.Org XInput driver : 12.2
> [   283.961] X.Org Server Extension : 5.0
> [   283.961] (--) PCI:*(0:1:0:0) 1002:4150:17ee:2002 rev 0, Mem @
> 0xc0000000/268435456, 0xfbee0000/65536, I/O @ 0x0000d000/256, BIOS @
> 0x????????/65536
> [   283.961] (--) PCI: (0:1:0:1) 1002:4170:17ee:2003 rev 0, Mem @
> 0xd0000000/268435456, 0xfbef0000/65536
> [   283.961] (==) Using default built-in configuration (30 lines)
> [   283.961] (==) --- Start of built-in configuration ---
> [   283.961] Section "Device"
> [   283.961] Identifier "Builtin Default ati Device 0"
> [   283.962] Driver "ati"
> [   283.962] EndSection
> [   283.962] Section "Screen"
> [   283.962] Identifier "Builtin Default ati Screen 0"
> [   283.962] Device "Builtin Default ati Device 0"
> [   283.962] EndSection
> [   283.962] Section "Device"
> [   283.962] Identifier "Builtin Default vesa Device 0"
> [   283.962] Driver "vesa"
> [   283.962] EndSection
> [   283.962] Section "Screen"
> [   283.962] Identifier "Builtin Default vesa Screen 0"
> [   283.962] Device "Builtin Default vesa Device 0"
> [   283.962] EndSection
> [   283.962] Section "Device"
> [   283.962] Identifier "Builtin Default fbdev Device 0"
> [   283.962] Driver "fbdev"
> [   283.962] EndSection
> [   283.962] Section "Screen"
> [   283.962] Identifier "Builtin Default fbdev Screen 0"
> [   283.962] Device "Builtin Default fbdev Device 0"
> [   283.962] EndSection
> [   283.962] Section "ServerLayout"
> [   283.962] Identifier "Builtin Default Layout"
> [   283.962] Screen "Builtin Default ati Screen 0"
> [   283.962] Screen "Builtin Default vesa Screen 0"
> [   283.962] Screen "Builtin Default fbdev Screen 0"
> [   283.962] EndSection
> [   283.962] (==) --- End of built-in configuration ---
> [   283.962] (==) ServerLayout "Builtin Default Layout"
> [   283.962] (**) |-->Screen "Builtin Default ati Screen 0" (0)
> [   283.962] (**) |   |-->Monitor "<default monitor>"
> [   283.962] (**) |   |-->Device "Builtin Default ati Device 0"
> [   283.962] (==) No monitor specified for screen "Builtin Default ati
> Screen 0".
> Using a default monitor configuration.
> [   283.962] (**) |-->Screen "Builtin Default vesa Screen 0" (1)
> [   283.962] (**) |   |-->Monitor "<default monitor>"
> [   283.963] (**) |   |-->Device "Builtin Default vesa Device 0"
> [   283.963] (==) No monitor specified for screen "Builtin Default
> vesa Screen 0".
> Using a default monitor configuration.
> [   283.963] (**) |-->Screen "Builtin Default fbdev Screen 0" (2)
> [   283.963] (**) |   |-->Monitor "<default monitor>"
> [   283.963] (**) |   |-->Device "Builtin Default fbdev Device 0"
> [   283.963] (==) No monitor specified for screen "Builtin Default
> fbdev Screen 0".
> Using a default monitor configuration.
> [   283.963] (==) Not automatically adding devices
> [   283.963] (==) Not automatically enabling devices
> [   283.963] (==) FontPath set to:
> /usr/local/lib/X11/fonts/misc/,
> /usr/local/lib/X11/fonts/TTF/,
> /usr/local/lib/X11/fonts/OTF/,
> /usr/local/lib/X11/fonts/Type1/,
> /usr/local/lib/X11/fonts/100dpi/,
> /usr/local/lib/X11/fonts/75dpi/
> [   283.963] (==) ModulePath set to "/usr/local/lib/xorg/modules"
> [   283.963] (==) |-->Input Device "<default pointer>"
> [   283.963] (==) |-->Input Device "<default keyboard>"
> [   283.963] (==) The core pointer device wasn't specified explicitly
> in the layout.
> Using the default mouse configuration.
> [   283.963] (==) The core keyboard device wasn't specified explicitly
> in the layout.
> Using the default keyboard configuration.
> [   283.963] (II) LoadModule: "extmod"
> [   283.964] (II) Loading /usr/local/lib/xorg/modules/extensions/libextmod.so
> [   283.964] (II) Module extmod: vendor="X.Org Foundation"
> [   283.964] compiled for 1.10.4, module version = 1.0.0
> [   283.964] Module class: X.Org Server Extension
> [   283.964] ABI class: X.Org Server Extension, version 5.0
> [   283.964] (II) Loading extension MIT-SCREEN-SAVER
> [   283.964] (II) Loading extension XFree86-VidModeExtension
> [   283.964] (II) Loading extension XFree86-DGA
> [   283.964] (II) Loading extension DPMS
> [   283.964] (II) Loading extension XVideo
> [   283.964] (II) Loading extension XVideo-MotionCompensation
> [   283.964] (II) Loading extension X-Resource
> [   283.964] (II) LoadModule: "dbe"
> [   283.965] (II) Loading /usr/local/lib/xorg/modules/extensions/libdbe.so
> [   283.965] (II) Module dbe: vendor="X.Org Foundation"
> [   283.965] compiled for 1.10.4, module version = 1.0.0
> [   283.965] Module class: X.Org Server Extension
> [   283.965] ABI class: X.Org Server Extension, version 5.0
> [   283.965] (II) Loading extension DOUBLE-BUFFER
> [   283.965] (II) LoadModule: "glx"
> [   283.966] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so
> [   283.966] (II) Module glx: vendor="X.Org Foundation"
> [   283.966] compiled for 1.10.4, module version = 1.0.0
> [   283.966] ABI class: X.Org Server Extension, version 5.0
> [   283.966] (==) AIGLX disabled
> [   283.966] (II) Loading extension GLX
> [   283.966] (II) LoadModule: "record"
> [   283.966] (II) Loading /usr/local/lib/xorg/modules/extensions/librecord.so
> [   283.966] (II) Module record: vendor="X.Org Foundation"
> [   283.966] compiled for 1.10.4, module version = 1.13.0
> [   283.967] Module class: X.Org Server Extension
> [   283.967] ABI class: X.Org Server Extension, version 5.0
> [   283.967] (II) Loading extension RECORD
> [   283.967] (II) LoadModule: "dri"
> [   283.967] (II) Loading /usr/local/lib/xorg/modules/extensions/libdri.so
> [   283.967] (II) Module dri: vendor="X.Org Foundation"
> [   283.967] compiled for 1.10.4, module version = 1.0.0
> [   283.967] ABI class: X.Org Server Extension, version 5.0
> [   283.967] (II) Loading extension XFree86-DRI
> [   283.967] (II) LoadModule: "dri2"
> [   283.968] (II) Loading /usr/local/lib/xorg/modules/extensions/libdri2.so
> [   283.968] (II) Module dri2: vendor="X.Org Foundation"
> [   283.968] compiled for 1.10.4, module version = 1.2.0
> [   283.968] ABI class: X.Org Server Extension, version 5.0
> [   283.968] (II) Loading extension DRI2
> [   283.968] (II) LoadModule: "ati"
> [   283.969] (II) Loading /usr/local/lib/xorg/modules/drivers/ati_drv.so
> [   283.995] (II) Module ati: vendor="X.Org Foundation"
> [   283.995] compiled for 1.10.4, module version = 6.14.3
> [   283.995] Module class: X.Org Video Driver
> [   283.995] ABI class: X.Org Video Driver, version 10.0
> [   283.995] (II) LoadModule: "radeon"
> [   283.996] (II) Loading /usr/local/lib/xorg/modules/drivers/radeon_drv.so
> [   283.998] (II) Module radeon: vendor="X.Org Foundation"
> [   283.998] compiled for 1.10.4, module version = 6.14.3
> [   283.998] Module class: X.Org Video Driver
> [   283.998] ABI class: X.Org Video Driver, version 10.0
> [   283.998] (II) LoadModule: "vesa"
> [   283.999] (II) Loading /usr/local/lib/xorg/modules/drivers/vesa_drv.so
> [   284.015] (II) Module vesa: vendor="X.Org Foundation"
> [   284.015] compiled for 1.10.4, module version = 2.3.0
> [   284.015] Module class: X.Org Video Driver
> [   284.015] ABI class: X.Org Video Driver, version 10.0
> [   284.015] (II) LoadModule: "fbdev"
> [   284.016] (II) Loading /usr/local/lib/xorg/modules/drivers/fbdev_drv.so
> [   284.022] (II) Module fbdev: vendor="X.Org Foundation"
> [   284.022] compiled for 1.10.4, module version = 0.4.2
> [   284.022] ABI class: X.Org Video Driver, version 10.0
> [   284.022] (II) LoadModule: "mouse"
> [   284.023] (II) Loading /usr/local/lib/xorg/modules/input/mouse_drv.so
> [   284.023] (II) Module mouse: vendor="X.Org Foundation"
> [   284.023] compiled for 1.10.4, module version = 1.7.1
> [   284.023] Module class: X.Org XInput Driver
> [   284.023] ABI class: X.Org XInput driver, version 12.2
> [   284.023] (II) LoadModule: "kbd"
> [   284.024] (II) Loading /usr/local/lib/xorg/modules/input/kbd_drv.so
> [   284.025] (II) Module kbd: vendor="X.Org Foundation"
> [   284.025] compiled for 1.10.4, module version = 1.6.1
> [   284.025] Module class: X.Org XInput Driver
> [   284.025] ABI class: X.Org XInput driver, version 12.2
> [   284.025] (II) RADEON: Driver for ATI Radeon chipsets:
> ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
> ATI Radeon Mobility X300 (M24) 3152 (PCIE),
> ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
> ATI Radeon X600 (RV380) 3E50 (PCIE),
> ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
> ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
> ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
> ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
> ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
> ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
> ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
> ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
> ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
> ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
> ATI Radeon IGP330M/340M/350M (U2) 4337,
> ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
> ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
> ATI Radeon X800PRO (R420) JI (AGP),
> ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
> ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
> ATI Radeon Mobility 9800 (M18) JN (AGP),
> ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
> ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
> ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
> ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
> ATI Radeon Mobility M7 LW (AGP),
> ATI Mobility FireGL 7800 M7 LX (AGP),
> ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
> ATI FireGL Mobility 9000 (M9) Ld (AGP),
> ATI Radeon Mobility 9000 (M9) Lf (AGP),
> ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
> ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
> ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
> ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
> ATI Radeon 9800XT NJ (AGP),
> ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
> ATI Radeon Mobility 9600 (M10) NQ (AGP),
> ATI Radeon Mobility 9600 (M11) NR (AGP),
> ATI Radeon Mobility 9600 (M10) NS (AGP),
> ATI FireGL Mobility T2 (M10) NT (AGP),
> ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
> ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
> ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
> ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
> ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
> ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
> ATI Radeon Mobility X300 (M22) 5460 (PCIE),
> ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
> ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
> ATI Radeon X800PRO (R423) UI (PCIE),
> ATI Radeon X800LE (R423) UJ (PCIE),
> ATI Radeon X800SE (R423) UK (PCIE),
> ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
> ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
> ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
> ATI FireGL unknown (R423) UR (PCIE),
> ATI FireGL unknown (R423) UT (PCIE),
> ATI Mobility FireGL V5000 (M26) (PCIE),
> ATI Mobility FireGL V5000 (M26) (PCIE),
> ATI Mobility Radeon X700 XL (M26) (PCIE),
> ATI Mobility Radeon X700 (M26) (PCIE),
> ATI Mobility Radeon X700 (M26) (PCIE),
> ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
> ATI Radeon Mobility 9100 IGP (U3) 5835,
> ATI Radeon XPRESS 200 5954 (PCIE),
> ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
> ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
> ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
> ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
> ATI Radeon XPRESS 200M 5975 (PCIE),
> ATI Radeon XPRESS 200 5A41 (PCIE),
> ATI Radeon XPRESS 200M 5A42 (PCIE),
> ATI Radeon XPRESS 200 5A61 (PCIE),
> ATI Radeon XPRESS 200M 5A62 (PCIE),
> ATI Radeon X300 (RV370) 5B60 (PCIE),
> ATI Radeon X600 (RV370) 5B62 (PCIE),
> ATI Radeon X550 (RV370) 5B63 (PCIE),
> ATI FireGL V3100 (RV370) 5B64 (PCIE),
> ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
> ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
> ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
> ATI Mobility Radeon X800 XT (M28) (PCIE),
> ATI Mobility FireGL V5100 (M28) (PCIE),
> ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
> ATI Radeon X850 XT PE (R480) (PCIE),
> ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
> ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
> ATI Radeon X850 XT (R480) (PCIE),
> ATI Radeon X800XT (R423) 5D57 (PCIE),
> ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
> ATI Radeon X700 PRO (RV410) (PCIE),
> ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
> ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
> ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
> ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
> ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
> ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
> ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
> ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
> ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
> ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
> ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
> ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
> ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
> ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
> ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
> ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
> ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
> ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
> ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
> ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
> ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
> ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
> ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
> ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
> ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
> ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
> ATI Mobility Radeon X1700, ATI Radeon X2300HD,
> ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
> ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
> ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
> ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
> ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
> ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
> ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
> ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
> ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
> ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
> ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
> ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
> ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
> ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
> ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
> ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
> ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
> ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
> ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
> ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
> AMD FireStream 9250, ATI FirePro V8700 (FireGL),
> ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
> ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
> ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
> ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
> ATI Mobility Radeon HD 4670, ATI FirePro M5750,
> ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
> ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
> ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
> ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
> ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
> ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
> ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
> ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
> ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
> ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
> ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
> ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
> ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
> ATI Mobility Radeon HD 3850 X2, ATI RV670,
> ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
> ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
> ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
> ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
> ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
> ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
> ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
> ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
> ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
> ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
> ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
> ATI FireGL V3600, ATI Radeon HD 2600 LE,
> ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
> ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
> ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
> ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
> ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
> ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
> ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
> ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
> ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
> ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
> ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
> ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
> ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
> SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200, ATI Radeon 4100,
> ATI Mobility Radeon HD 4200, ATI Mobility Radeon 4100,
> ATI Radeon HD 4290, ATI Radeon HD 4250, AMD Radeon HD 6310 Graphics,
> AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
> AMD Radeon HD 6250 Graphics, AMD Radeon HD 6300 Series Graphics,
> AMD Radeon HD 6200 Series Graphics, CYPRESS,
> ATI FirePro (FireGL) Graphics Adapter,
> ATI FirePro (FireGL) Graphics Adapter,
> ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
> AMD Firestream 9350, ATI Radeon HD 5800 Series,
> ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
> ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
> ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
> ATI Mobility Radeon HD 5800 Series,
> ATI FirePro (FireGL) Graphics Adapter,
> ATI FirePro (FireGL) Graphics Adapter,
> ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
> ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
> ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
> ATI Mobility Radeon HD 5000 Series,
> ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
> ATI FirePro (FireGL) Graphics Adapter,
> ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
> ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
> ATI Mobility Radeon HD 5000 Series,
> ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
> ATI Mobility Radeon Graphics, CEDAR,
> ATI FirePro (FireGL) Graphics Adapter,
> ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
> ATI Radeon HD 5450, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
> CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, AMD Radeon HD 6900 Series,
> AMD Radeon HD 6900 Series, CAYMAN, CAYMAN, CAYMAN,
> AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,
> BARTS, Mobility Radeon HD 6000 Series,
> Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
> AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
> AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
> TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, CAICOS,
> CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
> CAICOS, CAICOS, CAICOS
> [   284.030] (II) VESA: driver for VESA chipsets: vesa
> [   284.030] (II) FBDEV: driver for framebuffer: fbdev
> [   284.030] (--) Using syscons driver with X support (version 2.0)
> [   284.030] (--) using VT number 9
>
> [   284.036] (II) Loading /usr/local/lib/xorg/modules/drivers/radeon_drv.so
> [   284.036] (II) [KMS] Kernel modesetting enabled.
> [   284.036] (WW) Falling back to old probe method for vesa
> [   284.036] (WW) Falling back to old probe method for fbdev
> [   284.036] (II) Loading sub module "fbdevhw"
> [   284.037] (II) LoadModule: "fbdevhw"
> [   284.037] (II) Loading /usr/local/lib/xorg/modules/libfbdevhw.so
> [   284.053] (II) Module fbdevhw: vendor="X.Org Foundation"
> [   284.053] compiled for 1.10.4, module version = 0.0.2
> [   284.053] ABI class: X.Org Video Driver, version 10.0
> [   284.053] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
> [   284.053] (II) RADEON(0): Creating default Display subsection in
> Screen section
> "Builtin Default ati Screen 0" for depth/fbbpp 24/32
> [   284.053] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
> [   284.053] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes
> (32 bpp pixmaps)
> [   284.053] (==) RADEON(0): Default visual is TrueColor
> [   284.053] (==) RADEON(0): RGB weight 888
> [   284.053] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
> [   284.053] (--) RADEON(0): Chipset: "ATI Radeon 9600 AP (AGP)"
> (ChipID = 0x4150)
> [   284.053] (II) RADEON(0): AGP card detected
> [   284.053] drmOpenDevice: node name is /dev/dri/card0
> [   284.055] drmOpenDevice: open result is 9, (OK)
> [   284.056] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
> [   284.056] drmOpenDevice: node name is /dev/dri/card0
> [   284.057] drmOpenDevice: open result is 9, (OK)
> [   284.057] drmOpenByBusid: drmOpenMinor returns 9
> [   284.057] drmOpenByBusid: Interface 1.4 failed, trying 1.1
> [   284.057] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
> [   284.057] (II) RADEON(0): Kernel too old missing accel information,
> assuming accel is working
> [   284.057] (II) Loading sub module "exa"
> [   284.057] (II) LoadModule: "exa"
> [   284.058] (II) Loading /usr/local/lib/xorg/modules/libexa.so
> [   284.058] (II) Module exa: vendor="X.Org Foundation"
> [   284.059] compiled for 1.10.4, module version = 2.5.0
> [   284.059] ABI class: X.Org Video Driver, version 10.0
> [   284.059] (II) RADEON(0): KMS Color Tiling: enabled
> [   284.059] (II) RADEON(0): KMS Pageflipping: enabled
> [   284.059] (II) RADEON(0): SwapBuffers wait for vsync: enabled
> [   284.059] (EE) RADEON(0): Kernel modesetting setup failed
> [   284.059] (II) UnloadModule: "radeon"
> [   284.059] (II) Unloading radeon
> [   284.059] (II) UnloadModule: "exa"
> [   284.059] (II) Unloading exa
> [   284.059] (EE) Screen(s) found, but none have a usable configuration.
> [   284.059]
> Fatal server error:
> [   284.059] no screens found
> [   284.059]
> Please consult the The X.Org Foundation support
> at http://wiki.x.org
>  for help.
> [   284.059] Please also check the log file at "/var/log/Xorg.0.log"
> for additional information.
> [   284.059]
> ============== Xorg.log [for when using no xorg.conf, and not using
> the said fbdevhwstub.c patch] ends ==============
>
> ============== Xorg.log [for when using no xorg.conf, and using the
> said fbdevhwstub.c patch] begins ==============
> [   783.163] _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
> [   783.163] _XSERVTransOpen: transport open failed for inet6/:0
> [   783.164] _XSERVTransMakeAllCOTSServerListeners: failed to open
> listener for inet6
> [   783.187]
> X.Org X Server 1.10.4
> Release Date: 2011-08-19
> [   783.187] X Protocol Version 11, Revision 0
> [   783.187] Build Operating System: FreeBSD 9.9-CURRENT i386
> [   783.187] Current Operating System: FreeBSD  9.9-CURRENT FreeBSD
> 9.9-CURRENT #1 r230760M: Fri Feb 10 18:56:46 CET 2012
> devhc@:/usr/obj/usr/src/sys/HQ i386
> [   783.188] Build Date: 11 February 2012  12:12:15AM
> [   783.188]
> [   783.188] Current version of pixman: 0.24.0
> [   783.188] Before reporting problems, check http://wiki.x.org
> to make sure that you have the latest version.
> [   783.188] Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> [   783.188] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Feb 11
> 00:18:23 2012
> [   783.204] (II) Loader magic: 0x81e1080
> [   783.204] (II) Module ABI versions:
> [   783.204] X.Org ANSI C Emulation: 0.4
> [   783.204] X.Org Video Driver: 10.0
> [   783.204] X.Org XInput driver : 12.2
> [   783.204] X.Org Server Extension : 5.0
> [   783.204] (--) PCI:*(0:1:0:0) 1002:4150:17ee:2002 rev 0, Mem @
> 0xc0000000/268435456, 0xfbee0000/65536, I/O @ 0x0000d000/256, BIOS @
> 0x????????/65536
> [   783.204] (--) PCI: (0:1:0:1) 1002:4170:17ee:2003 rev 0, Mem @
> 0xd0000000/268435456, 0xfbef0000/65536
> [   783.204] (==) Using default built-in configuration (30 lines)
> [   783.204] (==) --- Start of built-in configuration ---
> [   783.204] Section "Device"
> [   783.204] Identifier "Builtin Default ati Device 0"
> [   783.204] Driver "ati"
> [   783.204] EndSection
> [   783.204] Section "Screen"
> [   783.204] Identifier "Builtin Default ati Screen 0"
> [   783.204] Device "Builtin Default ati Device 0"
> [   783.204] EndSection
> [   783.204] Section "Device"
> [   783.204] Identifier "Builtin Default vesa Device 0"
> [   783.204] Driver "vesa"
> [   783.204] EndSection
> [   783.204] Section "Screen"
> [   783.204] Identifier "Builtin Default vesa Screen 0"
> [   783.204] Device "Builtin Default vesa Device 0"
> [   783.204] EndSection
> [   783.204] Section "Device"
> [   783.205] Identifier "Builtin Default fbdev Device 0"
> [   783.205] Driver "fbdev"
> [   783.205] EndSection
> [   783.205] Section "Screen"
> [   783.205] Identifier "Builtin Default fbdev Screen 0"
> [   783.205] Device "Builtin Default fbdev Device 0"
> [   783.205] EndSection
> [   783.205] Section "ServerLayout"
> [   783.205] Identifier "Builtin Default Layout"
> [   783.205] Screen "Builtin Default ati Screen 0"
> [   783.205] Screen "Builtin Default vesa Screen 0"
> [   783.205] Screen "Builtin Default fbdev Screen 0"
> [   783.205] EndSection
> [   783.205] (==) --- End of built-in configuration ---
> [   783.205] (==) ServerLayout "Builtin Default Layout"
> [   783.205] (**) |-->Screen "Builtin Default ati Screen 0" (0)
> [   783.205] (**) |   |-->Monitor "<default monitor>"
> [   783.205] (**) |   |-->Device "Builtin Default ati Device 0"
> [   783.205] (==) No monitor specified for screen "Builtin Default ati
> Screen 0".
> Using a default monitor configuration.
> [   783.205] (**) |-->Screen "Builtin Default vesa Screen 0" (1)
> [   783.205] (**) |   |-->Monitor "<default monitor>"
> [   783.205] (**) |   |-->Device "Builtin Default vesa Device 0"
> [   783.205] (==) No monitor specified for screen "Builtin Default
> vesa Screen 0".
> Using a default monitor configuration.
> [   783.205] (**) |-->Screen "Builtin Default fbdev Screen 0" (2)
> [   783.205] (**) |   |-->Monitor "<default monitor>"
> [   783.206] (**) |   |-->Device "Builtin Default fbdev Device 0"
> [   783.206] (==) No monitor specified for screen "Builtin Default
> fbdev Screen 0".
> Using a default monitor configuration.
> [   783.206] (==) Not automatically adding devices
> [   783.206] (==) Not automatically enabling devices
> [   783.206] (==) FontPath set to:
> /usr/local/lib/X11/fonts/misc/,
> /usr/local/lib/X11/fonts/TTF/,
> /usr/local/lib/X11/fonts/OTF/,
> /usr/local/lib/X11/fonts/Type1/,
> /usr/local/lib/X11/fonts/100dpi/,
> /usr/local/lib/X11/fonts/75dpi/
> [   783.206] (==) ModulePath set to "/usr/local/lib/xorg/modules"
> [   783.206] (==) |-->Input Device "<default pointer>"
> [   783.206] (==) |-->Input Device "<default keyboard>"
> [   783.206] (==) The core pointer device wasn't specified explicitly
> in the layout.
> Using the default mouse configuration.
> [   783.206] (==) The core keyboard device wasn't specified explicitly
> in the layout.
> Using the default keyboard configuration.
> [   783.206] (II) LoadModule: "extmod"
> [   783.215] (II) Loading /usr/local/lib/xorg/modules/extensions/libextmod.so
> [   783.216] (II) Module extmod: vendor="X.Org Foundation"
> [   783.216] compiled for 1.10.4, module version = 1.0.0
> [   783.216] Module class: X.Org Server Extension
> [   783.216] ABI class: X.Org Server Extension, version 5.0
> [   783.216] (II) Loading extension MIT-SCREEN-SAVER
> [   783.216] (II) Loading extension XFree86-VidModeExtension
> [   783.216] (II) Loading extension XFree86-DGA
> [   783.216] (II) Loading extension DPMS
> [   783.216] (II) Loading extension XVideo
> [   783.216] (II) Loading extension XVideo-MotionCompensation
> [   783.216] (II) Loading extension X-Resource
> [   783.216] (II) LoadModule: "dbe"
> [   783.216] (II) Loading /usr/local/lib/xorg/modules/extensions/libdbe.so
> [   783.216] (II) Module dbe: vendor="X.Org Foundation"
> [   783.216] compiled for 1.10.4, module version = 1.0.0
> [   783.216] Module class: X.Org Server Extension
> [   783.216] ABI class: X.Org Server Extension, version 5.0
> [   783.216] (II) Loading extension DOUBLE-BUFFER
> [   783.216] (II) LoadModule: "glx"
> [   783.217] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so
> [   783.217] (II) Module glx: vendor="X.Org Foundation"
> [   783.217] compiled for 1.10.4, module version = 1.0.0
> [   783.217] ABI class: X.Org Server Extension, version 5.0
> [   783.217] (==) AIGLX disabled
> [   783.217] (II) Loading extension GLX
> [   783.217] (II) LoadModule: "record"
> [   783.218] (II) Loading /usr/local/lib/xorg/modules/extensions/librecord.so
> [   783.218] (II) Module record: vendor="X.Org Foundation"
> [   783.218] compiled for 1.10.4, module version = 1.13.0
> [   783.218] Module class: X.Org Server Extension
> [   783.218] ABI class: X.Org Server Extension, version 5.0
> [   783.218] (II) Loading extension RECORD
> [   783.218] (II) LoadModule: "dri"
> [   783.218] (II) Loading /usr/local/lib/xorg/modules/extensions/libdri.so
> [   783.219] (II) Module dri: vendor="X.Org Foundation"
> [   783.219] compiled for 1.10.4, module version = 1.0.0
> [   783.219] ABI class: X.Org Server Extension, version 5.0
> [   783.219] (II) Loading extension XFree86-DRI
> [   783.219] (II) LoadModule: "dri2"
> [   783.219] (II) Loading /usr/local/lib/xorg/modules/extensions/libdri2.so
> [   783.219] (II) Module dri2: vendor="X.Org Foundation"
> [   783.219] compiled for 1.10.4, module version = 1.2.0
> [   783.219] ABI class: X.Org Server Extension, version 5.0
> [   783.219] (II) Loading extension DRI2
> [   783.219] (II) LoadModule: "ati"
> [   783.221] (II) Loading /usr/local/lib/xorg/modules/drivers/ati_drv.so
> [   783.221] (II) Module ati: vendor="X.Org Foundation"
> [   783.221] compiled for 1.10.4, module version = 6.14.3
> [   783.221] Module class: X.Org Video Driver
> [   783.221] ABI class: X.Org Video Driver, version 10.0
> [   783.221] (II) LoadModule: "radeon"
> [   783.223] (II) Loading /usr/local/lib/xorg/modules/drivers/radeon_drv.so
> [   783.224] (II) Module radeon: vendor="X.Org Foundation"
> [   783.224] compiled for 1.10.4, module version = 6.14.3
> [   783.224] Module class: X.Org Video Driver
> [   783.224] ABI class: X.Org Video Driver, version 10.0
> [   783.224] (II) LoadModule: "vesa"
> [   783.225] (II) Loading /usr/local/lib/xorg/modules/drivers/vesa_drv.so
> [   783.225] (II) Module vesa: vendor="X.Org Foundation"
> [   783.226] compiled for 1.10.4, module version = 2.3.0
> [   783.226] Module class: X.Org Video Driver
> [   783.226] ABI class: X.Org Video Driver, version 10.0
> [   783.226] (II) LoadModule: "fbdev"
> [   783.227] (II) Loading /usr/local/lib/xorg/modules/drivers/fbdev_drv.so
> [   783.227] (II) Module fbdev: vendor="X.Org Foundation"
> [   783.227] compiled for 1.10.4, module version = 0.4.2
> [   783.227] ABI class: X.Org Video Driver, version 10.0
> [   783.227] (II) LoadModule: "mouse"
> [   783.228] (II) Loading /usr/local/lib/xorg/modules/input/mouse_drv.so
> [   783.229] (II) Module mouse: vendor="X.Org Foundation"
> [   783.229] compiled for 1.10.4, module version = 1.7.1
> [   783.229] Module class: X.Org XInput Driver
> [   783.229] ABI class: X.Org XInput driver, version 12.2
> [   783.229] (II) LoadModule: "kbd"
> [   783.230] (II) Loading /usr/local/lib/xorg/modules/input/kbd_drv.so
> [   783.230] (II) Module kbd: vendor="X.Org Foundation"
> [   783.230] compiled for 1.10.4, module version = 1.6.1
> [   783.230] Module class: X.Org XInput Driver
> [   783.230] ABI class: X.Org XInput driver, version 12.2
> [   783.230] (II) RADEON: Driver for ATI Radeon chipsets:
> ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
> ATI Radeon Mobility X300 (M24) 3152 (PCIE),
> ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
> ATI Radeon X600 (RV380) 3E50 (PCIE),
> ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
> ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
> ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
> ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
> ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
> ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
> ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
> ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
> ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
> ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
> ATI Radeon IGP330M/340M/350M (U2) 4337,
> ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
> ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
> ATI Radeon X800PRO (R420) JI (AGP),
> ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
> ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
> ATI Radeon Mobility 9800 (M18) JN (AGP),
> ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
> ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
> ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
> ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
> ATI Radeon Mobility M7 LW (AGP),
> ATI Mobility FireGL 7800 M7 LX (AGP),
> ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
> ATI FireGL Mobility 9000 (M9) Ld (AGP),
> ATI Radeon Mobility 9000 (M9) Lf (AGP),
> ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
> ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
> ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
> ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
> ATI Radeon 9800XT NJ (AGP),
> ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
> ATI Radeon Mobility 9600 (M10) NQ (AGP),
> ATI Radeon Mobility 9600 (M11) NR (AGP),
> ATI Radeon Mobility 9600 (M10) NS (AGP),
> ATI FireGL Mobility T2 (M10) NT (AGP),
> ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
> ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
> ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
> ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
> ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
> ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
> ATI Radeon Mobility X300 (M22) 5460 (PCIE),
> ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
> ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
> ATI Radeon X800PRO (R423) UI (PCIE),
> ATI Radeon X800LE (R423) UJ (PCIE),
> ATI Radeon X800SE (R423) UK (PCIE),
> ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
> ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
> ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
> ATI FireGL unknown (R423) UR (PCIE),
> ATI FireGL unknown (R423) UT (PCIE),
> ATI Mobility FireGL V5000 (M26) (PCIE),
> ATI Mobility FireGL V5000 (M26) (PCIE),
> ATI Mobility Radeon X700 XL (M26) (PCIE),
> ATI Mobility Radeon X700 (M26) (PCIE),
> ATI Mobility Radeon X700 (M26) (PCIE),
> ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
> ATI Radeon Mobility 9100 IGP (U3) 5835,
> ATI Radeon XPRESS 200 5954 (PCIE),
> ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
> ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
> ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
> ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
> ATI Radeon XPRESS 200M 5975 (PCIE),
> ATI Radeon XPRESS 200 5A41 (PCIE),
> ATI Radeon XPRESS 200M 5A42 (PCIE),
> ATI Radeon XPRESS 200 5A61 (PCIE),
> ATI Radeon XPRESS 200M 5A62 (PCIE),
> ATI Radeon X300 (RV370) 5B60 (PCIE),
> ATI Radeon X600 (RV370) 5B62 (PCIE),
> ATI Radeon X550 (RV370) 5B63 (PCIE),
> ATI FireGL V3100 (RV370) 5B64 (PCIE),
> ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
> ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
> ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
> ATI Mobility Radeon X800 XT (M28) (PCIE),
> ATI Mobility FireGL V5100 (M28) (PCIE),
> ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
> ATI Radeon X850 XT PE (R480) (PCIE),
> ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
> ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
> ATI Radeon X850 XT (R480) (PCIE),
> ATI Radeon X800XT (R423) 5D57 (PCIE),
> ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
> ATI Radeon X700 PRO (RV410) (PCIE),
> ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
> ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
> ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
> ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
> ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
> ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
> ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
> ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
> ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
> ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
> ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
> ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
> ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
> ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
> ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
> ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
> ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
> ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
> ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
> ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
> ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
> ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
> ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
> ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
> ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
> ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
> ATI Mobility Radeon X1700, ATI Radeon X2300HD,
> ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
> ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
> ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
> ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
> ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
> ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
> ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
> ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
> ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
> ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
> ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
> ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
> ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
> ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
> ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
> ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
> ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
> ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
> ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
> ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
> AMD FireStream 9250, ATI FirePro V8700 (FireGL),
> ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
> ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
> ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
> ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
> ATI Mobility Radeon HD 4670, ATI FirePro M5750,
> ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
> ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
> ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
> ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
> ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
> ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
> ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
> ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
> ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
> ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
> ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
> ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
> ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
> ATI Mobility Radeon HD 3850 X2, ATI RV670,
> ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
> ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
> ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
> ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
> ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
> ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
> ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
> ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
> ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
> ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
> ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
> ATI FireGL V3600, ATI Radeon HD 2600 LE,
> ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
> ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
> ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
> ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
> ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
> ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
> ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
> ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
> ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
> ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
> ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
> ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
> ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
> SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200, ATI Radeon 4100,
> ATI Mobility Radeon HD 4200, ATI Mobility Radeon 4100,
> ATI Radeon HD 4290, ATI Radeon HD 4250, AMD Radeon HD 6310 Graphics,
> AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
> AMD Radeon HD 6250 Graphics, AMD Radeon HD 6300 Series Graphics,
> AMD Radeon HD 6200 Series Graphics, CYPRESS,
> ATI FirePro (FireGL) Graphics Adapter,
> ATI FirePro (FireGL) Graphics Adapter,
> ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
> AMD Firestream 9350, ATI Radeon HD 5800 Series,
> ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
> ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
> ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
> ATI Mobility Radeon HD 5800 Series,
> ATI FirePro (FireGL) Graphics Adapter,
> ATI FirePro (FireGL) Graphics Adapter,
> ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
> ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
> ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
> ATI Mobility Radeon HD 5000 Series,
> ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
> ATI FirePro (FireGL) Graphics Adapter,
> ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
> ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
> ATI Mobility Radeon HD 5000 Series,
> ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
> ATI Mobility Radeon Graphics, CEDAR,
> ATI FirePro (FireGL) Graphics Adapter,
> ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
> ATI Radeon HD 5450, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
> CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, AMD Radeon HD 6900 Series,
> AMD Radeon HD 6900 Series, CAYMAN, CAYMAN, CAYMAN,
> AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,
> BARTS, Mobility Radeon HD 6000 Series,
> Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
> AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
> AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
> TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, CAICOS,
> CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
> CAICOS, CAICOS, CAICOS
> [   783.235] (II) VESA: driver for VESA chipsets: vesa
> [   783.235] (II) FBDEV: driver for framebuffer: fbdev
> [   783.236] (--) Using syscons driver with X support (version 2.0)
> [   783.236] (--) using VT number 9
>
> [   783.241] (II) Loading /usr/local/lib/xorg/modules/drivers/radeon_drv.so
> [   783.241] (II) [KMS] Kernel modesetting enabled.
> [   783.242] (WW) Falling back to old probe method for vesa
> [   783.242] (WW) Falling back to old probe method for fbdev
> [   783.242] (II) Loading sub module "fbdevhw"
> [   783.242] (II) LoadModule: "fbdevhw"
> [   783.242] (II) Loading /usr/local/lib/xorg/modules/libfbdevhw.so
> [   783.242] (EE) LoadModule: Module fbdevhw does not have a
> fbdevhwModuleData data object.
> [   783.242] (II) UnloadModule: "fbdevhw"
> [   783.242] (II) Unloading fbdevhw
> [   783.242] (EE) Failed to load module "fbdevhw" (invalid module, 0)
> [   783.242] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
> [   783.242] (II) RADEON(0): Creating default Display subsection in
> Screen section
> "Builtin Default ati Screen 0" for depth/fbbpp 24/32
> [   783.242] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
> [   783.242] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes
> (32 bpp pixmaps)
> [   783.242] (==) RADEON(0): Default visual is TrueColor
> [   783.243] (==) RADEON(0): RGB weight 888
> [   783.243] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
> [   783.243] (--) RADEON(0): Chipset: "ATI Radeon 9600 AP (AGP)"
> (ChipID = 0x4150)
> [   783.243] (II) RADEON(0): AGP card detected
> [   783.243] drmOpenDevice: node name is /dev/dri/card0
> [   783.244] drmOpenDevice: open result is 9, (OK)
> [   783.245] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
> [   783.245] drmOpenDevice: node name is /dev/dri/card0
> [   783.246] drmOpenDevice: open result is 9, (OK)
> [   783.246] drmOpenByBusid: drmOpenMinor returns 9
> [   783.246] drmOpenByBusid: Interface 1.4 failed, trying 1.1
> [   783.246] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
> [   783.246] (II) RADEON(0): Kernel too old missing accel information,
> assuming accel is working
> [   783.246] (II) Loading sub module "exa"
> [   783.247] (II) LoadModule: "exa"
> [   783.247] (II) Loading /usr/local/lib/xorg/modules/libexa.so
> [   783.248] (II) Module exa: vendor="X.Org Foundation"
> [   783.248] compiled for 1.10.4, module version = 2.5.0
> [   783.248] ABI class: X.Org Video Driver, version 10.0
> [   783.248] (II) RADEON(0): KMS Color Tiling: enabled
> [   783.248] (II) RADEON(0): KMS Pageflipping: enabled
> [   783.248] (II) RADEON(0): SwapBuffers wait for vsync: enabled
> [   783.248] (EE) RADEON(0): Kernel modesetting setup failed
> [   783.248] (II) UnloadModule: "radeon"
> [   783.248] (II) Unloading radeon
> [   783.248] (II) UnloadModule: "exa"
> [   783.248] (II) Unloading exa
> [   783.248] (EE) Screen(s) found, but none have a usable configuration.
> [   783.248]
> Fatal server error:
> [   783.248] no screens found
> [   783.248]
> Please consult the The X.Org Foundation support
> at http://wiki.x.org
>  for help.
> [   783.248] Please also check the log file at "/var/log/Xorg.0.log"
> for additional information.
> [   783.248]
> ============== Xorg.log [for when using no xorg.conf, and using the
> said fbdevhwstub.c patch] ends ==============
>
> ============== my kernel configuration begins ==============
> cpu I686_CPU
> ident HQ
>
> #makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols
>
> #options SCHED_ULE # ULE scheduler
> options SCHED_4BSD
> options PREEMPTION # Enable kernel thread preemption
> options INET # InterNETworking
> options FFS # Berkeley Fast Filesystem
> options SOFTUPDATES # Enable FFS soft updates support
> options UFS_DIRHASH # Improve performance on big directories
> options MD_ROOT # MD is a potential root device
> options MSDOSFS # MSDOS Filesystem
> options CD9660 # ISO 9660 Filesystem
> options GEOM_PART_GPT # GUID Partition Tables.
> options GEOM_LABEL # Provides labelization
> options COMPAT_FREEBSD4 # Compatible with FreeBSD4
> options COMPAT_FREEBSD5 # Compatible with FreeBSD5
> options COMPAT_FREEBSD6 # Compatible with FreeBSD6
> options COMPAT_FREEBSD7 # Compatible with FreeBSD7
> options SCSI_DELAY=1000 # Delay (in ms) before probing SCSI
> options SYSVSHM # SYSV-style shared memory
> options SYSVMSG # SYSV-style message queues
> options SYSVSEM # SYSV-style semaphores
> options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
> options PRINTF_BUFR_SIZE=128 # Prevent printf output being interspersed.
> options KBD_INSTALL_CDEV # install a CDEV entry in /dev
> options INCLUDE_CONFIG_FILE     # Include this file in kernel
>
> # To make an SMP kernel, the next two lines are needed
> options SMP # Symmetric MultiProcessor Kernel
> device apic # I/O APIC
>
> # CPU frequency control
> device cpufreq
>
> # Bus support.
> device acpi
> device pci
>
> # ATA controllers
> device ahci # AHCI-compatible SATA controllers
> device ata # Legacy ATA/SATA controllers
> options ATA_CAM # Handle legacy controllers with CAM
> options ATA_STATIC_ID # Static device numbering
>
> # ATA/SCSI peripherals
> device scbus # SCSI bus (required for ATA/SCSI)
> device ch # SCSI media changers
> device da # Direct Access (disks)
> device cd # CD
> device pass # Passthrough device (direct ATA/SCSI access)
> device ses # Enclosure Services (SES and SAF-TE)
>
> # atkbdc0 controls both the keyboard and the PS/2 mouse
> device atkbdc # AT keyboard controller
> device atkbd # AT keyboard
> device psm # PS/2 mouse
>
> device vga # VGA video card driver
>
> # syscons is the default console driver, resembling an SCO console
> device sc
> options SC_PIXEL_MODE # add support for the raster text mode
>
> device agp # support several AGP chipsets
>
> # Power management support (see NOTES for more options)
> #device apm
> # Add suspend/resume support for the i8254.
> device pmtimer
>
> # PCI Ethernet NICs that use the common MII bus controller code.
> # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
> device miibus # MII bus support
> device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet
>
> # Pseudo devices.
> device loop # Network loopback
> device random # Entropy device
> device ether # Ethernet support
> device pty # BSD-style compatibility pseudo ttys
> device md # Memory "disks"
> device firmware # firmware assist module
>
> # USB support
> device uhci # UHCI PCI->USB interface
> device ohci # OHCI PCI->USB interface
> device ehci # EHCI PCI->USB interface (USB 2.0)
> device usb # USB Bus (required)
> device uhid # "Human Interface Devices"
> device ukbd # Keyboard
> device umass # Disks/Mass storage - Requires scbus and da
> device ums # Mouse
>
> # Sound support
> device sound # Generic sound driver (required)
> device snd_es137x # Ensoniq AudioPCI ES137x
>
> #device drm # [!!!] causes a build error [!!!]
> #device radeondrm
> ============== my kernel configuration ends ==============
>
> ============== log for ``make buildkernel KERNCONF=HQ'' when HQ
> contains ``options drm'' begins ==============
> make buildkernel KERNCONF=HQ
>

[SNIP parts of buildlog]

> :> hack.c
> cc -shared -nostdlib hack.c -o hack.So
> rm -f hack.c
> MAKE=make sh /usr/src/sys/conf/newvers.sh HQ
> cc -c -O2 -pipe -fno-strict-aliasing -march=pentium4 -std=c99  -Wall
> -Wredundant-decls -Wnested-externs -Wstrict-prototypes
> -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual  -Wundef
> -Wno-pointer-sign -fformat-extensions  -Wmissing-include-dirs
> -fdiagnostics-show-option   -nostdinc  -I. -I/usr/src/sys
> -I/usr/src/sys/contrib/altq -D_KERNEL -DHAVE_KERNEL_OPTION_HEADERS
> -include opt_global.h -fno-common -finline-limit=8000 --param
> inline-unit-growth=100 --param large-function-growth=1000
> -mno-align-long-strings -mpreferred-stack-boundary=2 -mno-sse -mno-mmx
> -msoft-float -ffreestanding -fstack-protector -Werror  vers.c
> linking kernel
> drm_drv.o: In function `drm_detach':
> drm_drv.c:(.text+0x896): undefined reference to `drm_gem_destroy'
> drm_drv.o: In function `drm_close':
> drm_drv.c:(.text+0x110e): undefined reference to `drm_gem_release'
> drm_drv.o: In function `drm_attach':
> drm_drv.c:(.text+0x1d7b): undefined reference to `drm_gem_init'
> drm_drv.o:(.data+0x90): undefined reference to `drm_gem_close_ioctl'
> drm_drv.o:(.data+0x9c): undefined reference to `drm_gem_flink_ioctl'
> drm_drv.o:(.data+0xa8): undefined reference to `drm_gem_open_ioctl'
> drm_drv.o:(.data+0x18c): undefined reference to `drm_setmaster_ioctl'
> drm_drv.o:(.data+0x198): undefined reference to `drm_dropmaster_ioctl'
> drm_drv.o:(.data+0x7a4): undefined reference to `drm_mode_getresources'
> drm_drv.o:(.data+0x7b0): undefined reference to `drm_mode_getcrtc'
> drm_drv.o:(.data+0x7bc): undefined reference to `drm_mode_setcrtc'
> drm_drv.o:(.data+0x7c8): undefined reference to `drm_mode_cursor_ioctl'
> drm_drv.o:(.data+0x7d4): undefined reference to `drm_mode_gamma_get_ioctl'
> drm_drv.o:(.data+0x7e0): undefined reference to `drm_mode_gamma_set_ioctl'
> drm_drv.o:(.data+0x7ec): undefined reference to `drm_mode_getencoder'
> drm_drv.o:(.data+0x7f8): undefined reference to `drm_mode_getconnector'
> drm_drv.o:(.data+0x804): undefined reference to `drm_mode_attachmode_ioctl'
> drm_drv.o:(.data+0x810): undefined reference to `drm_mode_detachmode_ioctl'
> drm_drv.o:(.data+0x81c): undefined reference to `drm_mode_getproperty_ioctl'
> drm_drv.o:(.data+0x828): undefined reference to
> `drm_mode_connector_property_set_ioctl'
> drm_drv.o:(.data+0x834): undefined reference to `drm_mode_getblob_ioctl'
> drm_drv.o:(.data+0x840): undefined reference to `drm_mode_getfb'
> drm_drv.o:(.data+0x84c): undefined reference to `drm_mode_addfb'
> drm_drv.o:(.data+0x858): undefined reference to `drm_mode_rmfb'
> drm_drv.o:(.data+0x864): undefined reference to `drm_mode_page_flip_ioctl'
> drm_drv.o:(.data+0x870): undefined reference to `drm_mode_dirtyfb_ioctl'
> drm_drv.o:(.data+0x87c): undefined reference to `drm_mode_create_dumb_ioctl'
> drm_drv.o:(.data+0x888): undefined reference to `drm_mode_mmap_dumb_ioctl'
> drm_drv.o:(.data+0x894): undefined reference to `drm_mode_destroy_dumb_ioctl'
> drm_drv.o:(.data+0x8a0): undefined reference to `drm_mode_getplane_res'
> drm_drv.o:(.data+0x8ac): undefined reference to `drm_mode_getplane'
> drm_drv.o:(.data+0x8b8): undefined reference to `drm_mode_setplane'
> drm_drv.o:(.data+0x8c4): undefined reference to `drm_mode_addfb2'
> drm_drv.o:(.data+0xc5c): undefined reference to `drm_gem_mmap_single'
> drm_fops.o: In function `drm_open_helper':
> drm_fops.c:(.text+0x531): undefined reference to `drm_gem_open'
> *** Error code 1
>
> Stop in /usr/obj/usr/src/sys/HQ.
> *** Error code 1
>
> Stop in /usr/src.
> *** Error code 1
>
> Stop in /usr/src.
>
> ============== log for ``make buildkernel KERNCONF=HQ'' when HQ
> contains ``options drm'' ends ==============

--

_______________________________________________
[hidden email] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-x11
To unsubscribe, send any mail to "[hidden email]"

[miwi]

On Sat, 11 Feb 2012 18:47:56 +0100
Niclas Zeising <[hidden email]> wrote:

> I think there is issues with the KMS patch and radeon cards, the KMS
> patch is primarily for intel cards, but I'm not 100% sure.  Can
> someone else please verify?


Yes as in the first mail mention, its for Intel users :)

- Martin

--
+------------------oOO--(_)--OOo----------------+
With best Regards,
        Martin Wilke (miwi_(at)_FreeBSD.org)
_______________________________________________
[hidden email] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-x11
To unsubscribe, send any mail to "[hidden email]"

[Volodymyr Kostyrko]

Adam K Kirchhoff wrote:

>
> I've run it for a while now and am actually having a pretty serious
> issue:
>
> http://thorn.visualtech.com/screenshot.jpg
>
> As you can see, that big window on the right monitor (though certainly
> doesn't limit itself to just that screen) is almost entirely corrupt.
> It's an xfce4 Terminal, though this can happen with nearly any window,
> and happens both with compositing enabled or disabled.  Getting the
> window to redraw somehow (either by highlighting all the text or
> resizing it) will fix tha areas that are redrawn.
>
> The problem is most often triggered by moving the window around, or
> moving other windows around on top of it.  Unfortunately, it makes X
> barely usable.

I'm not involved with testing new version but I can second this issue
with current version in ports. When I managed to add my TV as a second
screen XFCE draws garbage instead of desktop on the second screen. E17
however worked like a charm. I mean... you sure this is not an XFCE issue?

--
Sphinx of black quartz judge my vow.
_______________________________________________
[hidden email] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-x11
To unsubscribe, send any mail to "[hidden email]"

[Adam K Kirchhoff-3]

On Mon, 13 Feb 2012 15:39:21 +0200
Volodymyr Kostyrko <[hidden email]> wrote:

> Adam K Kirchhoff wrote:
> >
> > I've run it for a while now and am actually having a pretty serious
> > issue:
> >
> > http://thorn.visualtech.com/screenshot.jpg
> >
> > As you can see, that big window on the right monitor (though
> > certainly doesn't limit itself to just that screen) is almost
> > entirely corrupt. It's an xfce4 Terminal, though this can happen
> > with nearly any window, and happens both with compositing enabled
> > or disabled.  Getting the window to redraw somehow (either by
> > highlighting all the text or resizing it) will fix tha areas that
> > are redrawn.
> >
> > The problem is most often triggered by moving the window around, or
> > moving other windows around on top of it.  Unfortunately, it makes X
> > barely usable.
>
> I'm not involved with testing new version but I can second this issue
> with current version in ports. When I managed to add my TV as a
> second screen XFCE draws garbage instead of desktop on the second
> screen. E17 however worked like a charm. I mean... you sure this is
> not an XFCE issue?

Yes, I'm quite sure. This happens with xfce4, kde4 and just plain
openbox.

I've seen similar distortion (though not quite the same as what's in my
screenshot) from the radeon driver even before testing this new
version.  I will, however, confirm these various corruptions with the
radeon driver happen less with E17.  

I've also seen the same thing on OpenBSD.  The distortion I've seen
with the driver/Xorg from ports I've also seen on Slackware when
disabling KMS, so I'm quite convinced this is a UMS-specific bug.

Adam
_______________________________________________
[hidden email] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-x11
To unsubscribe, send any mail to "[hidden email]"

[Volodymyr Kostyrko]

Adam K Kirchhoff wrote:

>>> I've run it for a while now and am actually having a pretty serious
>>> issue:
>>>
>>> http://thorn.visualtech.com/screenshot.jpg
>>>
>>> As you can see, that big window on the right monitor (though
>>> certainly doesn't limit itself to just that screen) is almost
>>> entirely corrupt. It's an xfce4 Terminal, though this can happen
>>> with nearly any window, and happens both with compositing enabled
>>> or disabled.  Getting the window to redraw somehow (either by
>>> highlighting all the text or resizing it) will fix tha areas that
>>> are redrawn.
>>>
>>> The problem is most often triggered by moving the window around, or
>>> moving other windows around on top of it.  Unfortunately, it makes X
>>> barely usable.
>>
>> I'm not involved with testing new version but I can second this issue
>> with current version in ports. When I managed to add my TV as a
>> second screen XFCE draws garbage instead of desktop on the second
>> screen. E17 however worked like a charm. I mean... you sure this is
>> not an XFCE issue?
>
> Yes, I'm quite sure. This happens with xfce4, kde4 and just plain
> openbox.
>
> I've seen similar distortion (though not quite the same as what's in my
> screenshot) from the radeon driver even before testing this new
> version.  I will, however, confirm these various corruptions with the
> radeon driver happen less with E17.

Yep, radeon here too.

--
Sphinx of black quartz judge my vow.
_______________________________________________
[hidden email] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-x11
To unsubscribe, send any mail to "[hidden email]"

[Luca Pizzamiglio-3]

Running on:

* Intel Sandybridge (+ optimus, disabled) on FreeBSD 9.0
* NVidia GTS 450 on FreeBSD 8.2

Not unkwonw problem.
Usual problem on Intel Sandybridge (tty switch, KMS patch issues on
FreeBSD 9 and optimus incompatibility (/dev/dri/card1)).

Tested with KDE 4.7.4 and desktop effect activated. Not all effect are
available using openGL. AFAIK KDE 4.8 is able to use more OpenGL effects
using the same library.

Thanks for the great job you've done!

Best regards,
Luca

On 02/06/12 02:45, Martin Wilke wrote:

> Knock knock...
>
> The X11 Team is pleased to announce the next round of Xorg updates.
> Note that this is experimental so you really have to know what you are
> doing, read UPDATING in the repository, and follow our exact
> instructions. We are specifically looking for feedback from Intel, ATI
> and NVIDIA users.
>
> Summary of changes:
>
> xf86-video-nouveau has been removed along with the WITHOUT_NOUVEAU
> knob. We suggest switching to the nvidia blob.
>
> KMS Support [1]:
> Unfortunately, the intel KMS driver will only work for the latest
> FreeBSD 9-STABLE or 10-CURRENT users. The patch for HEAD current is
> named all.13.1.patch. The higher the version the newer the patch is.
> Other needed patches are already available in the Xorg update.
>
> HEAD Users:
> Get the latest patchset from Kib here:
> http://people.freebsd.org/~kib/drm/
>
> 9-STABLE Users:
> 'meowthink' is currently maintaining the backport to 9 STABLE.
> Make sure you have the latest FreeBSD 9-STABLE source.
> Get the patch from here:
> https://docs.google.com/leaf?id=0BxbPi2OX4_B-NWY3NWU3MzEtNDBjYy00NTljLThlZGItMWFlYjIyYjI4Yjk3&hl=en_US
>
> Rebuild your Kernel and reboot.
>
> Known issuse:
> There will be a patch reject in the sys/dev/drm/i915_suspend.c file.
> The solution is to manually undo the expansion of the $FreeBSD: ....$
> tag, so it only saysis $FreeBSD$.
>
> Checkout Xorg Development Repo:
> You will need to install devel/subversion in order to checkout the xorg
> repo. Next, you will need to add WITH_NEW_XORG=yes in
> your /etc/make.conf if you want to try out the new Xorg and mesa.
>
> Intel users: note that if you are not qualified for the KMS patch, you
> shouldn't use WITH_NEW_XORG=yes because the old intel driver doesn't
> build with the new X server. If you are qualified, you should also set
> WITH_KMS=yes in /etc/make.conf.
>
> svn co https://trillian.chruetertee.ch/svn/ports/tags/xorg_7_5_2
>
> A small merge script to merge the svn checkout into the real portstree
> can be found here:
>
> http://people.freebsd.org/~miwi/xorg/xorgmerge
>
> The script is a modified version of the old kdemerge script. Please set
> the KDEDIR variable to the path of your X.org ports.
>
> After merging, run one of the following command, depending on which
> tool you use to manage your installed packages.
>
>      portupgrade -af \*
>      portmaster -a
>
> After installing these, you will have to rebuild all xf86-* ports. We
> will bump all related ports during the commit to the ports tree.
>
> Roadmap:
>
> Our current plan is to let the CFT running until the last weekend of
> February. We hope to get a lot feedback to solve as many problems as
> possible. So please help us to get the best xorg update ever in!
>
>
> Links:
> http://wiki.freebsd.org/Intel_GPU [1]
> http://wiki.freebsd.org/Xorg
> http://miwi.bsdcrew.de/2012/02/working-on-xorg-stuff/
>
> Your FreeBSD Xorg Team
>
> PS: Please reply to the x11@ mailing list. Cross posted due to the
> potentially disruptive nature of the change and need to get a wide
> variety of testers.
>

_______________________________________________
[hidden email] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-x11
To unsubscribe, send any mail to "[hidden email]"

[Peter Jeremy-6]

On 2012-Feb-06 01:45:36 +0000, Martin Wilke <[hidden email]> wrote:
>The X11 Team is pleased to announce the next round of Xorg updates.

Thank you all for your efforts.

I've tried xorg_7_5_2 r420 on my testbox ("ATI Radeon X600 (RV370)
5B62 (PCIE)" running FreeBSD 9-stable/amd64 (r231557M) and driving
dual displays via DVI) and (once I got past the build problems) all
seems OK.

Build problems with drm-all.13.0-stable9.1.patch:
- Neither patch to sys/modules/drm/{drm,i915}/Makefile applied -
  apparently due to whitespace issues.
- No patch to sys/conf/files was provided so building a kernel with
  drm builtin failed.  A patch to correct this is attached.
- device drm now depends on iicbus and i915drm appears to additionally
  depend on iicbb (I didn't try building this due to lack of hardware).

I've done some simple tests - moving xterms between screens, playing
video with mplayer, watching the Firefox 10 video and playing with
various mesa-demos programs.

Minor items:
1) graphics/mesa-demos remains at 7.6.1, rather than being upgraded to
   7.11.2 with all the other Mesa code.
2) AIGLX is disabled by default, though xorg.conf(5) states it is
   enabled by default.  This is probably a X.org Project bug and,
   checking back, 7.5.1 is the same
3) There's still no man page drm(4)

--
Peter Jeremy

[Jakub Lach]

Hi,

Any nifty patches for intel xorg-server 1.10.6 on
9-STABLE?

(As it's default now on xorg_7_5_2 repo.)

[Alberto Villa-3]

I don't know if this has been reported already, but libGL now requires
glproto as run dependency too:

$ grep glproto /usr/local/libdata/pkgconfig/gl.pc
Requires.private: glproto >= 1.4.11 libdrm >= 2.4.24 dri2proto >= 2.1
x11 xext xdamage xfixes xxf86vm x11-xcb xcb-glx

I checked an old package, and this wasn't the case. As a result,
pkgconfig fails on every package depending - even remotely - on gl.pc
(thus breaking some builds - at least one for me):

$ pkg-config --cflags swfdec-0.8
Package glproto was not found in the pkg-config search path.
Perhaps you should add the directory containing `glproto.pc'
to the PKG_CONFIG_PATH environment variable
Package 'glproto', required by 'gl', not found

Installing glproto fixes the issue.
--
Alberto Villa, FreeBSD committer <[hidden email]>
http://people.FreeBSD.org/~avilla
_______________________________________________
[hidden email] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-x11
To unsubscribe, send any mail to "[hidden email]"