Quantcast

kern/138938: Synaptics Support dosn't work on Dell Latitude d600

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

kern/138938: Synaptics Support dosn't work on Dell Latitude d600

Andrii Petrenko

>Number:         138938
>Category:       kern
>Synopsis:       Synaptics Support dosn't work on Dell Latitude  d600
>Confidential:   no
>Severity:       non-critical
>Priority:       medium
>Responsible:    freebsd-bugs
>State:          open
>Quarter:        
>Keywords:      
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Fri Sep 18 15:50:03 UTC 2009
>Closed-Date:
>Last-Modified:
>Originator:     Andrii Petrenko
>Release:        8.0-BETA4
>Organization:
>Environment:
FreeBSD f8l.apl 8.0-BETA4 FreeBSD 8.0-BETA4 #4: Wed Sep 16 22:44:11 PDT 2009     [hidden email]:/usr/obj/usr/src/sys/LAPTOP  i386

>Description:
Synaptics support doesn't work on FreeBSD. But works fine with linux and windows on the same hardware.

#cat /boot/loader.conf
opensolaris_load="YES"
zfs_load="YES"
vfs.root.mountfrom="zfs:zroot"
sem_load="YES"
sound_load="YES"
snd_ich_load="YES"
snd_hda_load="YES"
hw.psm.synaptics_support=1


#sysctl hw.psm
hw.psm.tap_timeout: 125000
hw.psm.tap_threshold: 25


Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-BETA4 #4: Wed Sep 16 22:44:11 PDT 2009
    [hidden email]:/usr/obj/usr/src/sys/LAPTOP
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0d9b000.
Preloaded elf module "/boot/kernel/zfs.ko" at 0xc0d9b14c.
Preloaded elf module "/boot/kernel/opensolaris.ko" at 0xc0d9b1f4.
Preloaded elf module "/boot/kernel/sound.ko" at 0xc0d9b2a4.
Preloaded elf module "/boot/kernel/snd_hda.ko" at 0xc0d9b350.
Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc0d9b3fc.
Preloaded /boot/zfs/zpool.cache "/boot/zfs/zpool.cache" at 0xc0d9b4a8.
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1798484335 Hz
CPU: Intel(R) Pentium(R) M processor 1.80GHz (1798.48-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6d6  Stepping = 6
  Features=0xafe9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
  Features2=0x180<EST,TM2>

Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries
Data TLB: 4 KB Pages, 4-way set associative, 128 entries
Instruction TLB: 4 MB pages, fully associative, 2 entries
2nd-level cache: 2-MB, 8-way set associative, 64-byte line size
1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size
Data TLB: 4 MB Pages, 4-way set associative, 8 entries
1st-level data cache: 32 KB, 8-way set associative, 64 byte line size
real memory  = 2147483648 (2048 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001026000 - 0x000000007db59fff, 2092122112 bytes (510772 pages)
avail memory = 2090872832 (1994 MB)
bios32: Found BIOS32 Service Directory header at 0xc00ffe80
bios32: Entry = 0xffe90 (c00ffe90)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xc96e
pnpbios: Found PnP BIOS data at 0xc00fe2d0
pnpbios: Entry = f0000:e2f4  Rev = 1.0
pnpbios: Event flag at 4b4
Other BIOS signatures found:
ULE: setup cpu 0
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
kbd: new array size 4
kbd1 at kbdmux0
VESA: information block
56 45 53 41 00 02 00 01 00 01 01 00 00 00 22 00
00 01 ff 01 00 01 19 01 00 01 2f 01 00 01 34 01
00 01 82 01 0d 01 0e 01 0f 01 20 01 92 01 93 01
94 01 95 01 96 01 a2 01 a3 01 a4 01 a5 01 a6 01
VESA: 60 mode(s) found
VESA: v2.0, 32704k memory, flags:0x1, mode table:0xc0ad63c2 (1000022)
VESA: ATI MOBILITY RADEON 9000
VESA: ATI Technologies Inc. M9   01.00
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
ACPI: RSDP 0xfdf00 00014 (v0 DELL  )
ACPI: RSDT 0x7fff0000 0002C (v1 DELL    CPi R   27D5061D ASL  00000061)
ACPI: FACP 0x7fff0400 00074 (v1 DELL    CPi R   27D5061D ASL  00000061)
ACPI: DSDT 0x7fff0c00 02E1A (v1 INT430 SYSFexxx 00001001 MSFT 0100000E)
ACPI: FACS 0x7ffff800 00040
ACPI: ASF! 0x7fff0800 0005B (v16 DELL    CPi R   27D5061D ASL  00000061)
npx0: INT 16 interface
acpi0: <DELL CPi R  > on motherboard
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: wakeup code va 0xc50c0000 pa 0x1000
atpic: Programming IRQ9 as level/low
pci_open(1): mode 1 addr port (0x0cf8) is 0x80010014
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=33408086)
pcibios: BIOS version 2.10
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.ISAB.PIR1 -> bus 0 dev 31 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.ISAB.PIR2 -> bus 0 dev 31 func 0
acpi0: reservation of 0, 9fc00 (3) failed
acpi0: reservation of 100000, 7fef0000 (3) failed
ACPI timer: 1/1 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  9 10 11
  Validation          0   11   N     0  9 10 11
  After Disable       0  255   N     0  9 10 11
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  5 7
  Validation          0  255   N     0  5 7
  After Disable       0  255   N     0  5 7
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  9 10 11
  Validation          0   11   N     0  9 10 11
  After Disable       0  255   N     0  9 10 11
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  5 7 9 10 11
  Validation          0   11   N     0  5 7 9 10 11
  After Disable       0  255   N     0  5 7 9 10 11
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 6 7 9 10 11 12 14 15
  Validation          0  255   N     0  3 4 5 6 7 9 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 9 10 11 12 14 15
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  3 4 5 6 7 9 10 11 12 14 15
  Validation          0   11   N     0  3 4 5 6 7 9 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 9 10 11 12 14 15
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI: Found matching pin for 0.31.INTA at func 1: 255
ACPI: Found matching pin for 0.31.INTB at func 5: 11
pci_link1: BIOS IRQ 11 for 0.31.INTB is invalid
ACPI: Found matching pin for 0.29.INTA at func 0: 11
ACPI: Found matching pin for 0.29.INTB at func 1: 11
ACPI: Found matching pin for 0.29.INTC at func 2: 11
ACPI: Found matching pin for 0.29.INTD at func 7: 11
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x3340, revid=0x03
        domain=0, bus=0, slot=0, func=0
        class=06-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        map[10]: type Prefetchable Memory, range 32, base 0xe0000000, size 27, enabled
found-> vendor=0x8086, dev=0x3341, revid=0x03
        domain=0, bus=0, slot=1, func=0
        class=06-04-00, hdrtype=0x01, mfdev=0
        cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
        lattimer=0x20 (960 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x24c2, revid=0x01
        domain=0, bus=0, slot=29, func=0
        class=0c-03-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=11
        map[20]: type I/O Port, range 32, base 0xbf80, size  5, enabled
pcib0: matched entry for 0.29.INTA (src \\_SB_.PCI0.LNKA:0)
pcib0: slot 29 INTA routed to irq 11 via \\_SB_.PCI0.LNKA
found-> vendor=0x8086, dev=0x24c4, revid=0x01
        domain=0, bus=0, slot=29, func=1
        class=0c-03-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=b, irq=11
        map[20]: type I/O Port, range 32, base 0xbf40, size  5, enabled
pcib0: matched entry for 0.29.INTB (src \\_SB_.PCI0.LNKD:0)
pcib0: slot 29 INTB routed to irq 11 via \\_SB_.PCI0.LNKD
found-> vendor=0x8086, dev=0x24c7, revid=0x01
        domain=0, bus=0, slot=29, func=2
        class=0c-03-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=c, irq=11
        map[20]: type I/O Port, range 32, base 0xbf20, size  5, enabled
pcib0: matched entry for 0.29.INTC (src \\_SB_.PCI0.LNKC:0)
pcib0: slot 29 INTC routed to irq 11 via \\_SB_.PCI0.LNKC
found-> vendor=0x8086, dev=0x24cd, revid=0x01
        domain=0, bus=0, slot=29, func=7
        class=0c-03-20, hdrtype=0x00, mfdev=0
        cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=d, irq=11
        powerspec 2  supports D0 D3  current D0
        map[10]: type Memory, range 32, base 0xf4fffc00, size 10, enabled
pcib0: matched entry for 0.29.INTD (src \\_SB_.PCI0.LNKH:0)
pcib0: slot 29 INTD routed to irq 11 via \\_SB_.PCI0.LNKH
found-> vendor=0x8086, dev=0x2448, revid=0x81
        domain=0, bus=0, slot=30, func=0
        class=06-04-00, hdrtype=0x01, mfdev=0
        cmdreg=0x0107, statreg=0x8080, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x24cc, revid=0x01
        domain=0, bus=0, slot=31, func=0
        class=06-01-00, hdrtype=0x00, mfdev=1
        cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x24ca, revid=0x01
        domain=0, bus=0, slot=31, func=1
        class=01-01-8a, hdrtype=0x00, mfdev=0
        cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=255
        map[20]: type I/O Port, range 32, base 0xbfa0, size  4, enabled
        map[24]: type Memory, range 32, base 0, size 10, memory disabled
found-> vendor=0x8086, dev=0x24c5, revid=0x01
        domain=0, bus=0, slot=31, func=5
        class=04-01-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=b, irq=11
        powerspec 2  supports D0 D3  current D0
        map[10]: type I/O Port, range 32, base 0xb800, size  8, enabled
        map[14]: type I/O Port, range 32, base 0xbc40, size  6, enabled
        map[18]: type Memory, range 32, base 0xf4fff800, size  9, enabled
        map[1c]: type Memory, range 32, base 0xf4fff400, size  8, enabled
pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LNKB:0)
pci_link1: Picked IRQ 9 with weight 0
pcib0: slot 31 INTB routed to irq 9 via \\_SB_.PCI0.LNKB
found-> vendor=0x8086, dev=0x24c6, revid=0x01
        domain=0, bus=0, slot=31, func=6
        class=07-03-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=b, irq=11
        powerspec 2  supports D0 D3  current D0
        map[10]: type I/O Port, range 32, base 0xb400, size  8, enabled
        map[14]: type I/O Port, range 32, base 0xb080, size  7, enabled
pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LNKB:0)
pcib0: slot 31 INTB routed to irq 9 via \\_SB_.PCI0.LNKB
agp0: <Intel 82855 host to AGP bridge> on hostb0
hostb0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xe0000000
agp0: allocating GATT for aperture of size 128M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xc000-0xcfff
pcib1:   memory decode     0xfc000000-0xfdffffff
pcib1:   prefetched decode 0xe8000000-0xefffffff
ACPI: Found matching pin for 1.0.INTA at func 0: 11
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
found-> vendor=0x1002, dev=0x4c66, revid=0x02
        domain=0, bus=1, slot=0, func=0
        class=03-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x01a7, statreg=0x02b0, cachelnsz=8 (dwords)
        lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=11
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[10]: type Prefetchable Memory, range 32, base 0xe8000000, size 27, enabled
pcib1: requested memory range 0xe8000000-0xefffffff: good
        map[14]: type I/O Port, range 32, base 0xc000, size  8, enabled
pcib1: requested I/O range 0xc000-0xc0ff: in range
        map[18]: type Memory, range 32, base 0xfcff0000, size 16, enabled
pcib1: requested memory range 0xfcff0000-0xfcffffff: good
pcib1: matched entry for 1.0.INTA (src \\_SB_.PCI0.LNKA:0)
pcib1: slot 0 INTA routed to irq 11 via \\_SB_.PCI0.LNKA
vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem 0xe8000000-0xefffffff,0xfcff0000-0xfcffffff irq 11 at device 0.0 on pci1
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xbf80-0xbf9f irq 11 at device 29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf80
uhci0: [MPSAFE]
uhci0: [ITHREAD]
uhci0: LegSup = 0x0000
usbus0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xbf40-0xbf5f irq 11 at device 29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf40
uhci1: [MPSAFE]
uhci1: [ITHREAD]
uhci1: LegSup = 0x0000
usbus1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xbf20-0xbf3f irq 11 at device 29.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf20
uhci2: [MPSAFE]
uhci2: [ITHREAD]
uhci2: LegSup = 0x0000
usbus2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xf4fffc00-0xf4ffffff irq 11 at device 29.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf4fffc00
ehci0: [MPSAFE]
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib2:   domain            0
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   I/O decode        0xd000-0xefff
pcib2:   memory decode     0xf6000000-0xfbffffff
pcib2:   no prefetched decode
pcib2:   Subtractively decoded bridge.
ACPI: Found matching pin for 2.1.INTA at func 0: 255
ACPI: Found matching pin for 2.1.INTA at func 1: 255
ACPI: Found matching pin for 2.3.INTA at func 0: 11
pci_link1: BIOS IRQ 11 for 2.3.INTA is invalid
ACPI: Found matching pin for 2.0.INTA at func 0: 11
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
found-> vendor=0x14e4, dev=0x165d, revid=0x01
        domain=0, bus=2, slot=0, func=0
        class=02-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0116, statreg=0x02b0, cachelnsz=8 (dwords)
        lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=11
        powerspec 2  supports D0 D3  current D0
        MSI supports 8 messages, 64 bit
        map[10]: type Memory, range 64, base 0xfaff0000, size 16, enabled
pcib2: requested memory range 0xfaff0000-0xfaffffff: good
pcib2: matched entry for 2.0.INTA (src \\_SB_.PCI0.LNKC:0)
pcib2: slot 0 INTA routed to irq 11 via \\_SB_.PCI0.LNKC
found-> vendor=0x1217, dev=0x7113, revid=0x20
        domain=0, bus=2, slot=1, func=0
        class=06-07-00, hdrtype=0x02, mfdev=1
        cmdreg=0x0000, statreg=0x0410, cachelnsz=0 (dwords)
        lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=255
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[10]: type Memory, range 32, base 0, size 12, memory disabled
found-> vendor=0x1217, dev=0x7113, revid=0x20
        domain=0, bus=2, slot=1, func=1
        class=06-07-00, hdrtype=0x02, mfdev=1
        cmdreg=0x0000, statreg=0x0410, cachelnsz=0 (dwords)
        lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=255
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[10]: type Memory, range 32, base 0, size 12, memory disabled
found-> vendor=0x14e4, dev=0x4320, revid=0x03
        domain=0, bus=2, slot=3, func=0
        class=02-80-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0106, statreg=0x0000, cachelnsz=0 (dwords)
        lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=11
        map[10]: type Memory, range 32, base 0xfafee000, size 13, enabled
pcib2: requested memory range 0xfafee000-0xfafeffff: good
pcib2: matched entry for 2.3.INTA (src \\_SB_.PCI0.LNKB:0)
pcib2: slot 3 INTA routed to irq 9 via \\_SB_.PCI0.LNKB
pci0:2:0:0: bad VPD cksum, remain 14
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x3001> mem 0xfaff0000-0xfaffffff irq 11 at device 0.0 on pci2
bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xfaff0000
bge0: CHIP ID 0x30010000; ASIC REV 0x03; CHIP REV 0x30; PCI
miibus0: <MII bus> on bge0
brgphy0: <BCM5705 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: OUI 0x000818, model 0x001a, rev. 1
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: bpf attached
bge0: Ethernet address: 00:11:43:46:cc:a7
bge0: [MPSAFE]
bge0: [ITHREAD]
cbb0: <O2Micro OZ711E1 PCI-CardBus Bridge> at device 1.0 on pci2
pcib2: cbb0 requested memory range 0x0-0xffffffff: good
cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80000000
cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x80000000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib2: matched entry for 2.1.INTA (src \\_SB_.PCI0.LNKD:0)
pcib2: slot 1 INTA routed to irq 11 via \\_SB_.PCI0.LNKD
cbb0: [MPSAFE]
cbb0: [FILTER]
cbb0: PCI Configuration space:
  0x00: 0x71131217 0x04100007 0x06070020 0x00822000
  0x10: 0x80000000 0x020000a0 0x20040302 0xfffff000
  0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffd
  0x30: 0x00000001 0x0000fffd 0x00000001 0x0440010b
  0x40: 0x011d1028 0x00000001 0x00000000 0x00000000
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000
  0x80: 0x00000000 0x00000000 0x00000000 0x018c1882
  0x90: 0x00350003 0x00000000 0x00000000 0x00000000
  0xa0: 0xfe020001 0x00c04000 0x00000000 0x00000009
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
  0xd0: 0x08004000 0x80820bea 0x00000000 0x00400000
  0xe0: 0x00828000 0x00000000 0x00000000 0x00000000
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
cbb1: <O2Micro OZ711E1 PCI-CardBus Bridge> at device 1.1 on pci2
pcib2: cbb1 requested memory range 0x0-0xffffffff: good
cbb1: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80001000
cbb1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x80001000
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pcib2: matched entry for 2.1.INTA (src \\_SB_.PCI0.LNKD:0)
pcib2: slot 1 INTA routed to irq 11 via \\_SB_.PCI0.LNKD
cbb1: [MPSAFE]
cbb1: [FILTER]
cbb1: PCI Configuration space:
  0x00: 0x71131217 0x04100007 0x06070020 0x00822000
  0x10: 0x80001000 0x020000a0 0x20060502 0xfffff000
  0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffd
  0x30: 0x00000001 0x0000fffd 0x00000001 0x0440010b
  0x40: 0x011d1028 0x00000001 0x00000000 0x00000000
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000
  0x80: 0x00000000 0x00000000 0x00000000 0x018c1882
  0x90: 0x00350003 0x00000000 0x00000000 0x00000000
  0xa0: 0xfe020001 0x00c04000 0x00000000 0x00000009
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
  0xd0: 0x08004000 0x80800bea 0x00000000 0x04400000
  0xe0: 0x00828000 0x00000000 0x00000000 0x00000000
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
bwi0: <Broadcom BCM4306 802.11b/g Wireless Lan> mem 0xfafee000-0xfafeffff irq 9 at device 3.0 on pci2
bwi0: Reserved 0x2000 bytes for rid 0x10 type 3 at 0xfafee000
bwi0: [MPSAFE]
bwi0: [ITHREAD]
bwi0: BBP: id 0x4306, rev 0x3, pkg 0
bwi0: MAC: rev 5
bwi0: PHY: type 2, rev 2, ver 2
bwi0: RF: manu 0x17f, type 0x2050, rev 2
bwi0: invalid antenna gain in sprom
bwi0: WARNING: using obsoleted if_watchdog interface
bwi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
bwi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xbfa0-0xbfaf at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xbfa0
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80
ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80
ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80
ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80
ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80
ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80
ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=01
ata1: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x01 err=0x04 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=10 stat1=01 devices=0x10000
ata1: [MPSAFE]
ata1: [ITHREAD]
pcm0: <Intel ICH4 (82801DB)> port 0xb800-0xb8ff,0xbc40-0xbc7f mem 0xf4fff800-0xf4fff9ff,0xf4fff400-0xf4fff4ff irq 9 at device 31.5 on pci0
pcm0: Reserved 0x200 bytes for rid 0x18 type 3 at 0xf4fff800
pcm0: Reserved 0x100 bytes for rid 0x1c type 3 at 0xf4fff400
pcm0: [MPSAFE]
pcm0: [ITHREAD]
pcm0: <SigmaTel STAC9750/51 AC97 Codec (id = 0x83847650)>
pcm0: Codec features headphone, 20 bit DAC, 20 bit ADC, 5 bit master volume, SigmaTel 3D Enhancement
pcm0: Primary codec extended features variable rate PCM, reserved 1, AMAP, reserved 4
pcm0: ac97 codec dac ready count: 0
pcm0: Mixer "vol":
pcm0: Mixer "pcm":
pcm0: Mixer "speaker":
pcm0: Mixer "line":
pcm0: Mixer "mic":
pcm0: Mixer "cd":
pcm0: Mixer "rec":
pcm0: Mixer "igain":
pcm0: Mixer "ogain":
pcm0: Mixer "line1":
pcm0: Mixer "phin":
pcm0: Mixer "phout":
pcm0: Mixer "video":
pcm0: clone manager: deadline=750ms flags=0x8000001e
pcm0: sndbuf_setmap 1d00000, 4000; 0xe5a00000 -> 1d00000
pcm0: sndbuf_setmap 1d04000, 4000; 0xe5a04000 -> 1d04000
pci0: <simple comms, generic modem> at device 31.6 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model GlidePoint, device ID 0-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us)
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart0: fast interrupt
ppc0: using extended I/O port range
ppc0: SPP ECP  ECP+EPP
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77b irq 7 drq 1 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppc0: [MPSAFE]
ppc0: [ITHREAD]
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
plip0: [MPSAFE]
plip0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: [MPSAFE]
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
isa_probe_children: disabling PnP devices
pmtimer0 on isa0
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sc: sc0 already exists; skipping it
uart: uart0 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 134088 -> 100000
procfs registered
ZFS NOTICE: prefetch is disabled by default on i386 - add enable to tunable to change.
ZFS WARNING: Recommended minimum kmem_size is 512MB; expect unstable behavior.
             Consider tuning vm.kmem_size and vm.kmem_size_max
             in /boot/loader.conf.
ZFS filesystem version 13
ZFS storage pool version 13
Timecounter "TSC" frequency 1798484335 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
ata0: Identifying devices: 00000001
ata0: New devices: 00000001
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
battery0: battery initialization start
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA66 cable=80 wire
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ad0: setting PIO4 on ICH4 chip
ad0: setting UDMA66 on ICH4 chip
battery0: battery initialization done, tried 1 times
battery1: battery initialization start
ad0: 19077MB <IBM DJSA-220 JS4OAC0A> at ata0-master UDMA66
ad0: 39070080 sectors [38760C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad0
pcib2: pccard1 requested memory range 0x88000000-0xffffffff: good
pccard1: CIS version PC Card Standard 7.0
pccard1: CIS info: O2Micro, SmartCardBus Reader, V1.0
pccard1: Manufacturer code 0xffff, product 0x1
pccard1: function 0: unspecified, ccr addr 0x220 mask 0x1
pccard1: function 0, config table entry 1: I/O card; irq mask 0xbeb8; iomask 0x5, iospace 0-0x1f; memspace 0-0xff; io16 irqlevel
pccard1: <unknown card> (manufacturer=0xffff, product=0x0001, function_type=-1) at function 0
pccard1:    CIS info: O2Micro, SmartCardBus Reader, V1.0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
ad0: Intel check1 failed
ad0: Adaptec check1 failed
ad0: LSI (v3) check1 failed
ad0: LSI (v2) check1 failed
ad0: FreeBSD check1 failed
ata1: Identifying devices: 00010000
ata1: New devices: 00010000
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on ICH4 chip
acd0: setting UDMA33 on ICH4 chip
acd0: <TSSTcorp DVD+/-RW TS-L632D/DE03> DVDR drive at ata1 as master
acd0: read 4134KB/s (4134KB/s) write 172KB/s (4134KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, DVDR, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
pcm0: measured ac97 link rate at 48021 Hz, will use 48000 Hz
ATA PseudoRAID loaded
Root mount waiting for: usbus3
Root mount waiting for: usbus3
Root mount waiting for: usbus3
uhub3: 6 ports with 6 removable, self powered
Trying to mount root from zfs:zroot
ct_to_ts([2009-09-18 07:48:50]) = 1253260130.000000000
start_init: trying /sbin/init
Linux ELF exec handler installed
linprocfs registered
pcib2: pccard1 requested memory range 0x88000000-0xffffffff: good
battery1: battery initialization failed, giving up
wlan0: bpf attached
wlan0: bpf attached
wlan0: Ethernet address: 00:0b:7d:1a:5b:aa
firmware: 'bwi_v3_ucode' version 0: 0 bytes loaded at 0xc88e63d4
firmware: 'bwi_v3_ucode11' version 0: 21680 bytes loaded at 0xc88e63d4
firmware: 'bwi_v3_ucode2' version 0: 16360 bytes loaded at 0xc88eb884
firmware: 'bwi_v3_ucode4' version 0: 20096 bytes loaded at 0xc88ef86c
firmware: 'bwi_v3_ucode5' version 0: 22280 bytes loaded at 0xc88f46ec
firmware: 'bwi_v3_a0g0bsinitvals2' version 0: 18 bytes loaded at 0xc88f9df4
firmware: 'bwi_v3_a0g0bsinitvals5' version 0: 158 bytes loaded at 0xc88f9e06
firmware: 'bwi_v3_a0g0initvals2' version 0: 2520 bytes loaded at 0xc88f9ea4
firmware: 'bwi_v3_a0g0initvals5' version 0: 1818 bytes loaded at 0xc88fa87c
firmware: 'bwi_v3_a0g1bsinitvals5' version 0: 158 bytes loaded at 0xc88faf96
firmware: 'bwi_v3_a0g1initvals5' version 0: 1818 bytes loaded at 0xc88fb034
firmware: 'bwi_v3_b0g0bsinitvals2' version 0: 18 bytes loaded at 0xc88fb74e
firmware: 'bwi_v3_b0g0bsinitvals5' version 0: 158 bytes loaded at 0xc88fb760
firmware: 'bwi_v3_b0g0initvals2' version 0: 2520 bytes loaded at 0xc88fb7fe
firmware: 'bwi_v3_b0g0initvals5' version 0: 1818 bytes loaded at 0xc88fc1d6
firmware: 'bwi_v3_pcm4' version 0: 1320 bytes loaded at 0xc88fc8f0
firmware: 'bwi_v3_pcm5' version 0: 1320 bytes loaded at 0xc88fce18
bwi0: firmware rev 0x0127, patch level 0x000e
wlan0: link state changed to UP
bwi0: need multicast update callback
bwi0: need multicast update callback
bwi0: need multicast update callback
wlan0: link state changed to DOWN
wlan0: link state changed to UP
bwi0: need multicast update callback
bwi0: need multicast update callback
wlan0: link state changed to DOWN
wlan0: link state changed to UP
acd0: FAILURE - READ_BIG MEDIUM ERROR asc=0x11 ascq=0x05
drm0: <ATI Radeon Lf RV250 Mobility 9000 M9 / FireMV 2400 PCI> on vgapci0
vgapci0: Reserved 0x10000 bytes for rid 0x18 type 3 at 0xfcff0000
vgapci0: child drm0 requested pci_enable_busmaster
info: [drm] AGP at 0xe0000000 128MB
info: [drm] Initialized radeon 1.29.0 20080528
vgapci0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xe8000000
agp0: Setting AGP v2 mode 4
info: [drm] Setting GART location based on new memory map
info: [drm] Loading R200 Microcode
info: [drm] writeback test succeeded in 2 usecs
drm0: [MPSAFE]
drm0: [ITHREAD]

>How-To-Repeat:
just boot GENERIC kerel with enabling synaptics support in .loader.conf on Dell Latitude D600.
>Fix:


>Release-Note:
>Audit-Trail:
>Unformatted:
_______________________________________________
[hidden email] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-bugs
To unsubscribe, send any mail to "[hidden email]"
Loading...